JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Home
Search results for: 'laticrete'

Search results for: 'laticrete'

Products

To place an order, simply add your selected items to the wishlist and submit them for a quotation.

LATICRETE BOND | 20 KG | GREY

LATICRETE BOND | 20 KG | GREY

Brand: LATICRETE

Size: 20 KG

Brand: LATICRETE | Size: 20 KG

Basic Information

Packaging: 20 Kg bags
Colors: Grey
Article Number: LA170305002521M

USES

Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

Wet density: 1.80 gm/cm³
Open time: 30 minutes
Pot life: 2 Hrs.
Time to traffic: 48 Hrs

Product Description

Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

In Stock

Basic Information

Packaging: 20 Kg bags
Colors: Grey
Article Number: LA170305002521M

USES

Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

Wet density: 1.80 gm/cm³
Open time: 30 minutes
Pot life: 2 Hrs.
Time to traffic: 48 Hrs

Product Description

Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

×