Authorized Distributor of Milwaukee, TCC, Arrow, Parabon in Dubai and other U.A.E Region.

Product Details

• Type: All Purpose Cleaner
• Item Package Quantity: 1
• Item Volume: 946 Milliliters
• Temperature application range is O°F - 110°F
• Article Number:PCC-70

Product Description

All of your All Purpose Cleaners needs in the UAE will be satisfied by Parabond C-70 500 ml PVC All Purpose Cleaner, ATC-214. with a ton of features and top-notch performance You won't be dissatisfied with Parabond C-70 500 ml PVC All Purpose Cleaner, ATC-214. One of Parabond's top Cleaning & Housekeeping/Cleaning Chemicals/All-Purpose Cleaners is this item. This cleaner is formulated tobe used with Parabond' PVC, CPVC and ASS solvent cement products. Cleaning the pipe and fitting prior to cementing always yields better results. The cleaner should be used to remove dirt, oil, grease and other foreignmaterial from the surface of the pipe and fittings to be cemented. This will insure a clean joint enabling the installer to apply a uniform amount of cement for a strong, tight joint.

Basic Information

• Packaging: 20 Kg bags
• Colors: Grey
• Article Number: LA170305002521M

USES

• Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

Product Details:

• Brushless POWERSTATE™ motor delivers more power in a more compact size
• Individual battery cell monitoring optimizes tool run time and ensures long-term pack durability
• 13 mm metal chuck for quick bit changes and bit retention
• Electronic clutch with 16 torque settings, plus 1 for locked clutch drilling and 1 for locked clutch hammer
• Fuel gauge displays remaining charge
• Bright LED workspace illumination
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

Basic Information:

• Chuck Capacity (mm): 13
• Max. Drilling Masonry (mm): 13
• Max. Drilling Steel (mm): 13
• Max. Drilling Wood (mm): 35
• Max. Percussion Rate (BPM): 0 - 25,500
• Max. Torque (Nm): 44
• No Load Speed Gear 1 (RPM): 0 - 450
• No Load Speed Gear 2 (RPM): 0 - 1700
• Speed Settings: 2
• Supplied In: No kitbox or bag supplied
• Wood Screws To (mm): 8
• Article Number: 4933459801

Power Source:

• Battery Pack Capacity (Ah): No batteries supplied
• Battery Type: Li-ion
• Charger Included: No charger supplied
• Charger Supplied: No charger supplied
• No. of Batteries Supplied: 0
• Voltage (V): 12

Weight:

• Weight with Battery Pack (EPTA) (kg): 1.2 (M12 B2)

• Compact brushless drill driver measuring 165 mm in length for access into tight spaces
• Advanced 13 mm heavy duty metal chuck for quick bit changes and superior bit retention
• 60 Nm of torque - best power to size ratio
• REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
• REDLITHIUM™ battery pack provides superior packconstruction, electronics and fade-free performance to deliver more run time and more work over pack life
• All metal reversible belt clip to hang your tool quickly and easily
• On board fuel gauge and LED light
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries

• The first cordless right angle die grinder that delivers more power vs. pneumatic models
• Compact size (only 119 mm long) to help fit in tight places, and offers great mobilityand access
• Features a 4-mode speed control and responsive variable speed trigger enabling outstanding control
• To be used with discs up to50 mm
• Supplied with 6 and 8 mm collets'
• The DNA ofour FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE‚®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™electronic intelligence delivering outstanding power, run time anddurabilityFlexible battery system: works with all MILWAUKEE‚® M12™ batteries

• Brushless POWERSTATE™ motor for up to 2x longer motor life and up to 25% more power
• REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tooland battery and uniquely enhances the tool performance under load
• REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Second hardest hitting SDS hammer in its class. Powerful hammer mechanism delivers 2.5 J of impact energy at low 8.9 m/s‚² vibrations
• Compact, ergonomic design for increased end user comfort
• All metal gear case - optimum seating of the gears for enhanced service life
• 4-mode operation: rotary hammer, hammer only, rotation only and selectable work position of the chisel (variolock) for maximum versatility
• FIXTEC™ system - keyless chuck changing
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Fuel gauge displays remaining charge
• Compatible with M18 CDEX dust extractor
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries

• POWERSTATE™ brushless motor delivers the power of AC trim routers, max. 31,000 rpm for powerful, smooth cutting
• Variable speed dial allows users to adjust the speed between 10,000 and 31,000 rpm to choose the best control for the application at hand
• All day run time on a single charge of an M18™ 5.0 Ah battery (up to 115m)
• Innovative height adjustment system incorporating a 0.4 mm micro adjustment
• Active brake stops the router bit quickly
• Included plunge base features 3 stop pins for multiple pass mortising
• Dual LED lights to illuminate the work surface
• Compatible with the dust collection shroud (DEK 26)
• Supplied with 2 x dust extraction attachments, 146 mm sub-baseplate which accepts 31.75 mm guide bushings, 6 mm and 6.35mm collets, plunge base, 2 x side fences
• Integrates three MILWAUKEE‚®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries

• Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
• Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
• Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
• FANG TIP™: For faster plunge cutting and reaching into restricted areas.
• NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
• Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
• Thick1.27 mm robust blade body for precise straight cuts.
• 25 mm blade height for improved stability and minimum vibration.
• Best for wood / nails / hardened fastners demolition

• Strong: Robust 1.06 mm thick body.
• Shatter resistant: The bi-metal blade body will bend and flex but not break.
• Torch: - Thick 1.06 mm robust blade body for precise cuts in sheet metal and pipes.
• 25 mm blade height for improved stability and minimum vibration.

• Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

• Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

• Step drills are ideal for drilling into the following materials: - Ferrous & non-ferrous sheets metals, profiles and pipes. - Copper, brass and aluminium. - Stainless steel. - Plastics. - Maximum material thickness 4 mm. - To ensure best lifetime we recommend the use of a coolant.
• Trades: - Electrical: drilling of panels and cabinets for cable gland installation. - Plumbing / HVAC: access holes for pipework and installation. - Metal workers / fabrication: various sizes and hole enlargement. - Automotive: holes for cable installation (mobile telephones, antennas, re-directing electrical wiring). - Maintenancerepair operations: various applications, sizes and hole enlargement.
• Step Drill advantages over conventional drill bits: - One drill bit to drill multiple sizes - Do more carry less! - Best option for enlargingexisting holes. - More durable than twist drill bits, thick core resists breakage. - More accurate and less walking, tip starts on contact. - Clean burr free holes, less reaming required. - Drills plastic without splitting or cracking.
• MILWAUKEE‚® Advantages
• Spot drill - Drill - Deburr - All in one go
• RAPID STRIKE TIP™: Accurate start without walking and fast drilling without the need to pre-drill the material.
• Special tip and step geometry for jam-free performance - less risk of drill snagging when used with high speed cordless tools and also prevents deformation of the drilled material.
• Optimised 2 flute groundsharpened edge geometry for 2 x faster and smoother cutting.
• Produced from custom engineered steel with black oxide coating for 4 x longer life.
• Optimised for use with high speed cordless drills.
• Laser engraved size markings for best long term visibility.
• Each step is relief ground to drill and deburr automatically.
• With 3 flat secure grip to prevent step drill from slipping in the chuck and ensure maximum transmission of torque.