Search results for: 'di flanged gate valves'

• Sealing at a minimum water column of 2 m
• Designed for easy installation and removal
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN65-DN100

• Material: PP-H
• Lockable lever as standard (DN10-DN50)
• For easy installation and removal (valve end and union nut are compatible with type 546)
• Ball seat PTFE
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
• Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)

Material: PP-H

Double flow rate compared to predecessor

One housing nut replaces four screws

Rotating air connection at 90° intervals

Joining faces flat/serrated

Overall length"EN 558

Connecting dimension: ISO 7005 PN 10EN 1092 PN 10167627114

• For ELGEF Plus ball valve d20-d110mm
• Extension spindle acc. to DVGW GW336
• Steel square connection 20x20mm for d20-75
• Steel square connection 25x25mm for d90-d110
• Continuously adjustable and self-supporting
• Pullout- and dirt-safe
• Rod hot-dip galvanized
• PE-casing and PE-centering cap with gasket
• Inclusive clip-pin out of stainless stell

• 10 bar Gas / 16 bar Water
• d160 up to d225 are supplied with base plate and straps
• d1 = diameter of bore
• Regarding pressure rate and application local standardsand regulations have to be considered

• 10 bar Gas / 16 bar Water
• With integrated drill bit to tap live mains under pressure
• Complete with lower part and premounted PE100 coated valve piece
• The valveis closed clockwise
• Number of turns to fully open or close valve is 13 for outlet d32
• Number of turns to fully open or close valve is 28 for outlet d63
• Spindle size (SW) 14
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet

• Built on with pneumatic actuator PA11 (DN10/15-25), PA21 (DN32-50)
• Control time 90°<) 1-2s
• For easy installation and removal
• Integrated stainless steel mounting inserts

• Full-plastic flange PP-GF (30 % glass-fibre reinforced)
• Metric: ISO 7005, EN 1092, ISO 9624
• ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
• Special flange adapter ANSI for d25 - d50 and d90 required

• Full-plastic flange PP-GF (30 % glass-fibre reinforced)
• Metric: ISO 7005, EN 1092, ISO 9624
• ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
• Special flange adapter ANSI for d25 - d50 and d90 required

• Material: PP (30% glass-fibre reinforced) with steel ring
• Metric: ISO 7005, EN 1092, ISO 9624
• ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
• Special flange adapter ANSI for d25 - d50 and d90 required

• Full-plastic flange PP-GF (30 % glass-fibre reinforced)
• Metric: ISO 7005, EN 1092, ISO 9624
• ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
• Special flange adapter ANSI for d25 - d50 and d90 required

• Full-plastic flange PP-GF (30 % glass-fibre reinforced)
• Metric: ISO 7005, EN 1092, ISO 9624
• ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
• Special flange adapter ANSI for d25 - d50 and d90 required