Search results for: 'safety relief valve'
Products
Grohe
3/4 IN
Grohe 3/4 IN
- pre-assembled headpart 3/4"
- short spindle
- protection sleeve
- thread union 3/4"
- DR-brass
- pre-assembled headpart 3/4"
- short spindle
- protection sleeve
- thread union 3/4"
- DR-brass
Grohe
1/2 IN
Grohe 1/2 IN
- single hole installation
- Touch: activation of cold water via skin contact
- battery supply 6 V lithium-battery, type CR-P2
- CE approved
- indication of battery status by different impulses
- safety shutdown circuit
- solenoid valve
- automatic safety stop after 60 sec. (factory set)
- type of protection IP 44
- GROHE StarLight finish
- GROHE SilkMove 46 mm ceramic cartridge
- C-spout
- adjustable flow rate limiter
- swivel tubular spout
- swivel area 360‚°
- pull-out mousseur spray
- automatic returning
- integrated non-return valve
- diverter: laminar spray/SpeedClean shower jet
- automatic return to laminar spray
- flexible connection hoses
- rapid installation system
- protected against backflow
- optional:
- upgrade for Touch function with mixed water:
- Grohtherm Micro 34 487 000
- connection set 47 533 000
- min. recommended pressure 1.0 bar
- single hole installation
- Touch: activation of cold water via skin contact
- battery supply 6 V lithium-battery, type CR-P2
- CE approved
- indication of battery status by different impulses
- safety shutdown circuit
- solenoid valve
- automatic safety stop after 60 sec. (factory set)
- type of protection IP 44
- GROHE StarLight finish
- GROHE SilkMove 46 mm ceramic cartridge
- C-spout
- adjustable flow rate limiter
- swivel tubular spout
- swivel area 360‚°
- pull-out mousseur spray
- automatic returning
- integrated non-return valve
- diverter: laminar spray/SpeedClean shower jet
- automatic return to laminar spray
- flexible connection hoses
- rapid installation system
- protected against backflow
- optional:
- upgrade for Touch function with mixed water:
- Grohtherm Micro 34 487 000
- connection set 47 533 000
- min. recommended pressure 1.0 bar
Grohe
1/2 IN
Grohe 1/2 IN
- for concealed installation
- marking: blue/red
- GROHE StarLight chrome finish
- 3 adjustable flow times: short - medium - long (factory setting: medium), approx. 7,15, 30 sec (pressure dependent)
- for concealed installation
- marking: blue/red
- GROHE StarLight chrome finish
- 3 adjustable flow times: short - medium - long (factory setting: medium), approx. 7,15, 30 sec (pressure dependent)
Grohe
1/2 IN
Grohe 1/2 IN
- 15 mm (½")
- chrome plated brass
- GROHE StarLight chrome finish
- with wall escutcheon
- 15 mm (½")
- chrome plated brass
- GROHE StarLight chrome finish
- with wall escutcheon
Grohe
7/8 IN
Grohe 7/8 IN
- retrofit unit for close-coupled flushing cisterns
- connection from the side
- with filling valve, servo discharge valve
- interruptible flush cycle
- fixing set with 100 mm screws and cellular rubber joint 100 mm dia.
- centring for filling and discharge valve when having larger bore holes
- GROHE StarLight chrome finish
- **) max. shortening 100 mm
- retrofit unit for close-coupled flushing cisterns
- connection from the side
- with filling valve, servo discharge valve
- interruptible flush cycle
- fixing set with 100 mm screws and cellular rubber joint 100 mm dia.
- centring for filling and discharge valve when having larger bore holes
- GROHE StarLight chrome finish
- **) max. shortening 100 mm
Grohe
STANDARD
Grohe STANDARD
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
Grohe
156 X 197 MM
Grohe 156 X 197 MM
- for dual flush
- for pneumatic discharge valve AV1
- vertical and horizontal installation
- 156 x 197 mm
- ABS
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- for combination with Rapid SL and Uniset with GD 2 cisterns
- for use with Rapid SLX please order shaft 66 791 000 (sold separately)
- for dual flush
- for pneumatic discharge valve AV1
- vertical and horizontal installation
- 156 x 197 mm
- ABS
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- for combination with Rapid SL and Uniset with GD 2 cisterns
- for use with Rapid SLX please order shaft 66 791 000 (sold separately)
GEORG FISCHER
250 MM
GEORG FISCHER 250 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Powerful 18V motor delivers over 690 bar max. operating pressure
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Extreme long run time - dispenses up to 7 cartridges per charge
- Strong handle balance and ergonomics - only 355 mm long and 3.9 kg
- Air bleeder valve - priming mechanism for quick flow
- Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and reducing down time
- Three way loading - bulk, cartridge and suction capable
- Grease capacity 400 ml cartridge, 473 ml bulk
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance todeliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE‚® M18™ batteries
- Supplied with 1219 mm high pressure flex hose with spring guard
- Powerful 18V motor delivers over 690 bar max. operating pressure
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Extreme long run time - dispenses up to 7 cartridges per charge
- Strong handle balance and ergonomics - only 355 mm long and 3.9 kg
- Air bleeder valve - priming mechanism for quick flow
- Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and reducing down time
- Three way loading - bulk, cartridge and suction capable
- Grease capacity 400 ml cartridge, 473 ml bulk
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance todeliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE‚® M18™ batteries
- Supplied with 1219 mm high pressure flex hose with spring guard
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Powerful 18V motor delivers over 690 bar max. operating pressure
- REDLINK™¾" overload protection electronics in tool and battery pack deliver best in class system durability
- Extreme long run time - dispenses up to 7 cartridges per charge
- Strong handle balance and ergonomics - only 355 mm long and 3.9 kg
- Air bleeder valve - priming mechanism for quick flow
- Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and reducing down time
- Three way loading - bulk, cartridge and suction capable
- Grease capacity 400 ml cartridge, 473 mlbulk
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- REDLITHIUM™¾" battery pack provides superior pack construction, electronics and fade-free performanceto deliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE™ M18™¾" batteries
- Supplied with 1219 mm high pressure flex hose with spring guard
- Powerful 18V motor delivers over 690 bar max. operating pressure
- REDLINK™¾" overload protection electronics in tool and battery pack deliver best in class system durability
- Extreme long run time - dispenses up to 7 cartridges per charge
- Strong handle balance and ergonomics - only 355 mm long and 3.9 kg
- Air bleeder valve - priming mechanism for quick flow
- Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and reducing down time
- Three way loading - bulk, cartridge and suction capable
- Grease capacity 400 ml cartridge, 473 mlbulk
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- REDLITHIUM™¾" battery pack provides superior pack construction, electronics and fade-free performanceto deliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE™ M18™¾" batteries
- Supplied with 1219 mm high pressure flex hose with spring guard
![MILWAUKEE M18 HEAT GUN [BARE-TOOL] | M18BHG-0](https://catalyst-dev2.wylog.com/media/catalog/product/cache/503f2f5e25f27962b01fad949171e229/M/I/MIL4933459771_0_9.jpg?t=20260209)
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- High performance heat coil allows the tool to reach 470‚°C
- Reaches operational temperature in six seconds allowing the user to quickly complete his application
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- Durableladder hook for work space management and safety
- Supplied with 2x nozzles: 1x reduction nozzle for heat intensity on a specific area, 1x reflector nozzle to apply heat around an object, such as pipes
- Integrated LED light to illuminate the work area
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE‚® M18™ batteries
- High performance heat coil allows the tool to reach 470‚°C
- Reaches operational temperature in six seconds allowing the user to quickly complete his application
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Individual battery cell monitoring optimises tool run time and ensures long term pack durability
- Durableladder hook for work space management and safety
- Supplied with 2x nozzles: 1x reduction nozzle for heat intensity on a specific area, 1x reflector nozzle to apply heat around an object, such as pipes
- Integrated LED light to illuminate the work area
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE‚® M18™ batteries
![MILWAUKEE M12 MULTI-TOOL [BARE-TOOL] | M12FMT-0](https://catalyst-dev2.wylog.com/media/catalog/product/cache/503f2f5e25f27962b01fad949171e229/M/I/MIL4933472238_0_7.jpg?t=20260209)
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Brushless POWERSTATE™ motor delivers fast cutting speed through common materials without slowing or bogging down in hardwoods
- Adjustable 10,000 to 20,000 opm allow the user toget the perfect cut whatever the material
- Lowest vibration in its class, 4.56 m/s‚² driving productivity through performance and safety
- 1.8‚° left/right oscillation angle allowing faster cuts
- Ability to make up to 59 cuts in oak on one 2.0 Ah battery charge
- REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
- FIXTEC™ tool free blade change with universal blade change adaptor included to accept all major competitor blades
- LED work light illuminates the cut line in low light conditions
- Suppliedwith an adapter, plunge cut blade OSC 112, sanding backing pad, 5 x sanding sheets and a DEK26 dust guard to use when sanding
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE‚® M12™ batteries
- Brushless POWERSTATE™ motor delivers fast cutting speed through common materials without slowing or bogging down in hardwoods
- Adjustable 10,000 to 20,000 opm allow the user toget the perfect cut whatever the material
- Lowest vibration in its class, 4.56 m/s‚² driving productivity through performance and safety
- 1.8‚° left/right oscillation angle allowing faster cuts
- Ability to make up to 59 cuts in oak on one 2.0 Ah battery charge
- REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
- FIXTEC™ tool free blade change with universal blade change adaptor included to accept all major competitor blades
- LED work light illuminates the cut line in low light conditions
- Suppliedwith an adapter, plunge cut blade OSC 112, sanding backing pad, 5 x sanding sheets and a DEK26 dust guard to use when sanding
- REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
- Flexible battery system: works with all MILWAUKEE‚® M12™ batteries
Filter
Shopping Options