Search results for: 'accessories-valve'

• Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
• Parabolic web cross section: Large web thickness. Strength built in.
• Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
• 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
• Impact resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque equalling less breakages.

• Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
• QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Colour: bronze.

SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

Best fitting thanks to 6 gripping points.

Recessed corners allow torque to be transferred across the flats of the socket rather than producing stress on the points or corners.

Thin wall construction provides access to tight spaces.'

Laser etched size markings for easy identification andwon't wear off.

connector set 3/8"

for copper pipe 10 mm

TDL handles

marking: neutral

escutcheon

GROHE StarLight finish

• Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
• Single band clamp with full circle gasket
• All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
• The rubber gasket is available in NBR (EPDM on request)
• Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
• For working pressures in GAS please consult Georg Fischer Waga N.V.
• To choose the correct length of Multi/Clamp check our technical information

• Consisting of:
• hand shower with trigger control (26 328)
• valve with integrated shower holder (26 333 000)
• Silverflex Longlife shower hose 1250 mm (26 335)
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Twistfree preventing the hose from twisting
• Min. recommended pressure 0.5 bar
• Please refer to local norms regarding installation.

• pre-assembled headpart 3/4"
• short spindle
• protection sleeve
• thread union 3/4"
• DR-brass

• for concealed installation
• marking: blue/red
• GROHE StarLight chrome finish
• 3 adjustable flow times: short - medium - long (factory setting: medium), approx. 7,15, 30 sec (pressure dependent)

• 15 mm (½")
• chrome plated brass
• GROHE StarLight chrome finish
• with wall escutcheon

• retrofit unit for close-coupled flushing cisterns
• connection from the side
• with filling valve, servo discharge valve
• interruptible flush cycle
• fixing set with 100 mm screws and cellular rubber joint 100 mm dia.
• centring for filling and discharge valve when having larger bore holes
• GROHE StarLight chrome finish
• **) max. shortening 100 mm

• adjustment ex factory 6 l and 3 l
• pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
• water supply from left/right/back or top
• low noise (group I acc. to German Noise Specification)
• insulated against condensation
• ½" water supply connection including integrated angle valve and push fit flexible hose union
• notools required for installation of inspection shaft
• for vertical or horizontal use
• flush pipe insulated against condensation
• fixing brackets
• for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately

• for dual flush
• for pneumatic discharge valve AV1
• vertical and horizontal installation
• 156 x 197 mm
• ABS
• GROHE StarLight chrome finish
• GROHE EcoJoy for less water and perfect flow
• for combination with Rapid SL and Uniset with GD 2 cisterns
• for use with Rapid SLX please order shaft 66 791 000 (sold separately)