Search results for: 'chrome angle valve'

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

• Cutting edge technology for maximum productivity.
• Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
• Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
• Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
• Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
• Diagonal slots aid the removaland ejection of the core.
• Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152

SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

Best fitting thanks to 6 gripping points.

Recessed corners allow torque to be transferred across the flats of the socket rather than producing stress on the points or corners.

Thin wall construction provides access to tight spaces.'

Laser etched size markings for easy identification andwon't wear off.

GROHE StarLight chrome finish

temperature scale handle with GROHE SafeStop safety stop at 38°C ( calibration required )

GROHE SafeStop Plus optional temperature limiter at 43°C included

shut off and flow control

Aquadimmer with multiple function

metal escutcheon

covered coupling

without concealed body

• final installation for
• 33 963 000
• without concealed body
• GROHE StarLight chrome finish
• automatic diverter: bath/shower
• escutcheon- and shaft-sealing
• metal rosette
• covered fixing

connector set 3/8"

for copper pipe 10 mm

TDL handles

marking: neutral

escutcheon

GROHE StarLight finish

• for free-standing basins
• metal lever
• GROHE Longlife 28 mm ceramic cartridge
• GROHE StarLight chrome finish
• mousseur
• pop-up waste set 1"
• flexible connection hoses
• rapid installation system

• set for final installation for
• GROHE Rapido SmartBox 35 600/35 604
• GROHE SilkMove 46 mm ceramic cartridge
• GROHE StarLight chrome finish
• wall escutcheonwith GROHE FastFixation(covered escutcheon- and shaft sealing, covered fixing)
• metal escutcheon, retroactively 6‚° adjustable
• metal lever
• 3-way diverter
• flow performance: outlet A = 27 l/min, outlet B = 27 l/min, outlet C = 27 l/min
• without roughing-in-set

• GROHE Rain O2, Rain, Massage
• Ball joint +/- 15‚° rotatable
• shower arm with connection thread 1/2"
• escutcheon
• GROHE DreamSpray perfect spray pattern
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Inner WaterGuide for a longer life
• suitable for instantaneous heater

• Consisting of:
• hand shower with trigger control (26 328)
• valve with integrated shower holder (26 333 000)
• Silverflex Longlife shower hose 1250 mm (26 335)
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Twistfree preventing the hose from twisting
• Min. recommended pressure 0.5 bar
• Please refer to local norms regarding installation.

• Consisting of:
• head shower Rainshower 310, spray plate chrome (26 561)
• 1 spray pattern:
• GROHE PureRain
• shower arm Rainshower 422 mm (26 146 000)
• GROHE DreamSpray perfect spray pattern
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Inner WaterGuide for a longer life
• suitable for instantaneous heater