Search results for: 'gf c-pvc pressure pipe systems'

• Cutting edge technology for maximum productivity.
• Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
• Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
• Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
• Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
• Diagonal slots aid the removaland ejection of the core.
• Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152

• Packed in cardboard boxes / PN 16
• Mono-layer pipe
• Material: PB
• SDR: 11
• Operation pressure: 16 bars

• Universal peeling for the preparation of all electrofusion joints
• For pipe ends and saddles
• Materials: PE 80, PE100, PE100-RC, PE-X, PP

• ANSI 150 Class according to ANSI B16.5
• 1/2" - 12" pressure rating is 150 psi @ 73°F (10.3 bar @ 22.7°C)
• 14" - 24" pressure rating is 100 psi @ 73°F (6.9 bar @ 22.7°C)- Steel Ring
• HC = Honeycomb (Face)

• Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
• Parabolic web cross section: Large web thickness. Strength built in.
• Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
• 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
• Impact resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque equalling less breakages.

GROHE StarLight chrome finish

temperature scale handle with GROHE SafeStop safety stop at 38°C ( calibration required )

GROHE SafeStop Plus optional temperature limiter at 43°C included

shut off and flow control

Aquadimmer with multiple function

metal escutcheon

covered coupling

without concealed body

connector set 3/8"

for copper pipe 10 mm

TDL handles

marking: neutral

escutcheon

GROHE StarLight finish

• Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
• Single band clamp with full circle gasket
• All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
• The rubber gasket is available in NBR (EPDM on request)
• Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
• For working pressures in GAS please consult Georg Fischer Waga N.V.
• To choose the correct length of Multi/Clamp check our technical information

• set for final installation for
• GROHE Rapido SmartBox 35 600/35 604
• GROHE SilkMove 46 mm ceramic cartridge
• GROHE StarLight chrome finish
• wall escutcheonwith GROHE FastFixation(covered escutcheon- and shaft sealing, covered fixing)
• metal escutcheon, retroactively 6‚° adjustable
• metal lever
• 3-way diverter
• flow performance: outlet A = 27 l/min, outlet B = 27 l/min, outlet C = 27 l/min
• without roughing-in-set

• Consisting of:
• hand shower with trigger control (26 328)
• valve with integrated shower holder (26 333 000)
• Silverflex Longlife shower hose 1250 mm (26 335)
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Twistfree preventing the hose from twisting
• Min. recommended pressure 0.5 bar
• Please refer to local norms regarding installation.

• with trigger control
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Inner WaterGuide for a longer life
• Universal Mounting System. Fitsall standard shower hoses
• Please refer to local norms regarding installation.

• hand shower Tempesta 100 II (27 597)
• wall shower holder (28 605)
• non-adjustable
• Relexaflex hose 1500 mm 1/2" x 1/2" (28 151)
• GROHE EcoJoy 5.7 l/min. flow limiter
• GROHE DreamSpray perfect spray pattern
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Inner WaterGuide for a longer life
• ShockProof silicone ring prevents damage caused by a shower falling
• min. recommended pressure 1.0 bar