Search results for: 'pvc pressure system'
Products
GEORG FISCHER
50 MM
GEORG FISCHER 50 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
In Stock
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
GEORG FISCHER
50 MM
GEORG FISCHER 50 MM
- Pressure rating: 16 bar water / 10 bar gas
In Stock
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
110 MM
GEORG FISCHER 110 MM
- Pressure rating: 16 bar water / 10 bar gas
- FM 1613 approved - 15 bar
In Stock
- Pressure rating: 16 bar water / 10 bar gas
- FM 1613 approved - 15 bar
GEORG FISCHER
63 x 2 MM TO INCH
GEORG FISCHER 63 x 2 MM TO INCH
- With solvent cement socket metric and parallel female thread Rp
- Reinforcing ring stainless (A2)
- Connection to plastic or metal threads
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
In Stock
- With solvent cement socket metric and parallel female thread Rp
- Reinforcing ring stainless (A2)
- Connection to plastic or metal threads
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
GEORG FISCHER
25 x 20 MM
GEORG FISCHER 25 x 20 MM
- Pressure rating: 16 bar water / 10 bar gas
In Stock
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
50 MM
GEORG FISCHER 50 MM
- C-PVC 90° EQUAL TEE 50MM
In Stock
- C-PVC 90° EQUAL TEE 50MM
GEORG FISCHER
50 x 40 MM
GEORG FISCHER 50 x 40 MM
- With solvent cement spigot and socket metric
In Stock
- With solvent cement spigot and socket metric
GEORG FISCHER
25 x 3/4 MM TO INCH
GEORG FISCHER 25 x 3/4 MM TO INCH
- 16 bar Water
- With integral pipe fixation
- 4 mm pin connectors
- Limited path fusion indicators
- Delivered as a kit. Further combinations: modular system with threaded adapter and (150 228-1) reductions
- Incl. flat gasket for water applications (KTW / WRAS approved)
In Stock
- 16 bar Water
- With integral pipe fixation
- 4 mm pin connectors
- Limited path fusion indicators
- Delivered as a kit. Further combinations: modular system with threaded adapter and (150 228-1) reductions
- Incl. flat gasket for water applications (KTW / WRAS approved)
GEORG FISCHER
90 x 50 MM
GEORG FISCHER 90 x 50 MM
- Pressure rating: 16 bar water / 10 bar gas
In Stock
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
63 MM
GEORG FISCHER 63 MM
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in considerationwith safety demands of the respective applications and calculated in accordance.
In Stock
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in considerationwith safety demands of the respective applications and calculated in accordance.
GEORG FISCHER
2 IN
GEORG FISCHER 2 IN
- With solvent cement spigot/socket metric and taper male thread R
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
In Stock
- With solvent cement spigot/socket metric and taper male thread R
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
GEORG FISCHER
20 MM
GEORG FISCHER 20 MM
"
Gasket: flat gasket EPDM code no. 748 400 306-320
Gasket: profile flange gasket EPDM code no. 748 440 706-720FKM code no. 749 440 706-720
Flanges (metric & ANSI): PVC-UPP-V
In Stock
"
Gasket: flat gasket EPDM code no. 748 400 306-320
Gasket: profile flange gasket EPDM code no. 748 440 706-720FKM code no. 749 440 706-720
Flanges (metric & ANSI): PVC-UPP-V
