Search results for: 'tapping saddle'
Products
Grohe
1/2 IN
Grohe 1/2 IN
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy 5.7 l/min. flow limiter
- 3 adjustable flow times: short - medium- long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy 5.7 l/min. flow limiter
- 3 adjustable flow times: short - medium- long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
GEORG FISCHER
6 x 2 IN
GEORG FISCHER 6 x 2 IN
- 1 bar Gas / 10 bar Water
- BS Inch
- NBR sealing
- Not according to German KTW-BWGL
- 1 bar Gas / 10 bar Water
- BS Inch
- NBR sealing
- Not according to German KTW-BWGL
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- 10 bar Gas / 16 bar Water
- Branch Saddle installation only with installation set Topload TL225 (799.300.807)
- Angle adaptors (799.350.340) for fusion cable required
- 4 mm pin connectors
- Limited path fusion indicators
- Spigot outlet for butt- and electrofusion
- Full pressure applicable - no derating factor
- With integrated pressure test port for test cap (799.199.287)
- 10 bar Gas / 16 bar Water
- Branch Saddle installation only with installation set Topload TL225 (799.300.807)
- Angle adaptors (799.350.340) for fusion cable required
- 4 mm pin connectors
- Limited path fusion indicators
- Spigot outlet for butt- and electrofusion
- Full pressure applicable - no derating factor
- With integrated pressure test port for test cap (799.199.287)
GEORG FISCHER
160 MM
GEORG FISCHER 160 MM
- 10 bar Gas / 16 bar Water
- With integrated drill bit to tap live mains under pressure
- Complete with lower part and premounted PE100 coated valve piece
- The valveis closed clockwise
- Number of turns to fully open or close valve is 13 for outlet d32
- Number of turns to fully open or close valve is 28 for outlet d63
- Spindle size (SW) 14
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- 10 bar Gas / 16 bar Water
- With integrated drill bit to tap live mains under pressure
- Complete with lower part and premounted PE100 coated valve piece
- The valveis closed clockwise
- Number of turns to fully open or close valve is 13 for outlet d32
- Number of turns to fully open or close valve is 28 for outlet d63
- Spindle size (SW) 14
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
GEORG FISCHER
63-1 IN
GEORG FISCHER 63-1 IN
- water PN16-10
- suitable for PE and PVC pipes
- material: PP
- female thread: ISO 7 (parallel)
- gasket: O-ring with flat lip (NBR)
- reinforcement ring:stainless steel AISI430
- bolts and nuts : stainless steel
- colour: blue
- B= N° of bolts
- M= bolt type
- (*) with O-ring gasket
- water PN16-10
- suitable for PE and PVC pipes
- material: PP
- female thread: ISO 7 (parallel)
- gasket: O-ring with flat lip (NBR)
- reinforcement ring:stainless steel AISI430
- bolts and nuts : stainless steel
- colour: blue
- B= N° of bolts
- M= bolt type
- (*) with O-ring gasket
GEORG FISCHER
110 MM
GEORG FISCHER 110 MM
- Universal peeling for the preparation of all electrofusion joints
- For pipe ends and saddles
- Materials: PE 80, PE100, PE100-RC, PE-X, PP
- Universal peeling for the preparation of all electrofusion joints
- For pipe ends and saddles
- Materials: PE 80, PE100, PE100-RC, PE-X, PP
Grohe
1/2 IN
Grohe 1/2 IN
- single hole installation
- metal lever
- ceramic headpart 1/2", 90‚°
- swivel tubular spout
- mousseur
- GROHE StarLight chrome finish
- fixation nut
- single hole installation
- metal lever
- ceramic headpart 1/2", 90‚°
- swivel tubular spout
- mousseur
- GROHE StarLight chrome finish
- fixation nut
Grohe
1/2 IN
Grohe 1/2 IN
- wall mounted
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- flow limiter 5.7 l/min
- 3 adjustable flow times: short - medium - long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
- wall mounted
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- flow limiter 5.7 l/min
- 3 adjustable flow times: short - medium - long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
GEORG FISCHER
63 MM
GEORG FISCHER 63 MM
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
GEORG FISCHER
110 x 50 MM
GEORG FISCHER 110 x 50 MM
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
GEORG FISCHER
180 x 50 MM
GEORG FISCHER 180 x 50 MM
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
GEORG FISCHER
63 MM
GEORG FISCHER 63 MM
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
- 10 bar Gas / 16 bar Water
- With integrated cutter to tap live mains under pressure
- Complete with lower part
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- O-ring-sealed screw cap
- Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
- d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.
Filter
Shopping Options