Search results for: 'non pressure testing'
Products
GEORG FISCHER
20 MM
GEORG FISCHER 20 MM
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
GEORG FISCHER
25 MM
GEORG FISCHER 25 MM
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- 10 bar Gas / 16 bar Water
- Branch Saddle installation only with installation set Topload TL225 (799.300.807)
- Angle adaptors (799.350.340) for fusion cable required
- 4 mm pin connectors
- Limited path fusion indicators
- Spigot outlet for butt- and electrofusion
- Full pressure applicable - no derating factor
- With integrated pressure test port for test cap (799.199.287)
- 10 bar Gas / 16 bar Water
- Branch Saddle installation only with installation set Topload TL225 (799.300.807)
- Angle adaptors (799.350.340) for fusion cable required
- 4 mm pin connectors
- Limited path fusion indicators
- Spigot outlet for butt- and electrofusion
- Full pressure applicable - no derating factor
- With integrated pressure test port for test cap (799.199.287)
GEORG FISCHER
110 x 90 MM
GEORG FISCHER 110 x 90 MM
- Pressure rating: 10 bar water / 5 bar gas
- Pressure rating: 10 bar water / 5 bar gas
GEORG FISCHER
125 MM
GEORG FISCHER 125 MM
- Packed in cardboard boxes / PN 16
- Mono-layer pipe
- Material: PB
- SDR: 11
- Operation pressure: 16 bars
- Packed in cardboard boxes / PN 16
- Mono-layer pipe
- Material: PB
- SDR: 11
- Operation pressure: 16 bars
GEORG FISCHER
10 IN
GEORG FISCHER 10 IN
- ANSI 150 Class according to ANSI B16.5
- 1/2" - 12" pressure rating is 150 psi @ 73°F (10.3 bar @ 22.7°C)
- 14" - 24" pressure rating is 100 psi @ 73°F (6.9 bar @ 22.7°C)- Steel Ring
- HC = Honeycomb (Face)
- ANSI 150 Class according to ANSI B16.5
- 1/2" - 12" pressure rating is 150 psi @ 73°F (10.3 bar @ 22.7°C)
- 14" - 24" pressure rating is 100 psi @ 73°F (6.9 bar @ 22.7°C)- Steel Ring
- HC = Honeycomb (Face)
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
GEORG FISCHER
63 MM
GEORG FISCHER 63 MM
- Pressure rating: 16 bar water / 10 bar gas
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
32 x 25 MM
GEORG FISCHER 32 x 25 MM
- Pressure rating: 16 bar water / 10 bar gas
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
110 MM
GEORG FISCHER 110 MM
- Pressure rating: 16 bar water / 10 bar gas
- FM 1613 approved - 15 bar
- Pressure rating: 16 bar water / 10 bar gas
- FM 1613 approved - 15 bar
GEORG FISCHER
75 x 50 MM
GEORG FISCHER 75 x 50 MM
- Pressure rating: 16 bar water / 10 bar gas
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
160 MM
GEORG FISCHER 160 MM
- Pressure rating: 16 bar water / 10 bar gas
- FM 1613 approved - 15 bar
- Pressure rating: 16 bar water / 10 bar gas
- FM 1613 approved - 15 bar
