Search results for: 'accessories-rough-in set'

• PN25 to 1/2 to 2"
• PN16 2 1/2 to 4"
• full bore
• quarter turn operation
• red lever handle
• 1/2 to 4" sizes
• PTFE ball seals
• brass body
• PTFE gland
• taper thread BS EN 10226 (ISO7-1)
• ISO 228 BS 2771 parallel thread (PT)

• Material: PVC-C, heat resistant
• Dimension: acc. to DIN 8079/80
• Colour: agate grey RAL 7038
• Pipe length: 5000mm, with plain ends
• Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in considerationwith safety demands of the respective applications and calculated in accordance.

• crutch top
• BS1010
• hose union

• single hole installation
• GROHE SilkMove 28 mm ceramic cartridge
• GROHE StarLight chrome finish
• GROHE EcoJoy 6.0 l/min. flow limiter
• rapid installation system
• mousseur
• pop-up waste set 1 1/4"
• flexible connection hoses

• 3 outlets 1/2"
• 2 inlets below, 1/2"
• installation depth 75-105 mm
• connection unit in DR brass
• pre-mounted flushing plug
• stable build-in box andprotective cover
• fixing options for solid walls and dry cladding
• gasket
• without set for final installation

• all sizes rated PN25
• full bore
• quarter turn operation
• blow-out and vandal- proof assembly
• red lever handle
• 1/4" to 4" sizes
• chrome plated
• forged brass body
• PTFE ball seals seals
• FPM "O" ring stem seal

• PN25 to 1/2 to 2"
• PN16 2 1/2 to 4"
• full bore
• quarter turn operation
• red lever handle
• 1/2 to 4" sizes
• PTFE ball seals
• brass body
• PTFE gland
• taper thread BS EN 10226 (ISO7-1)
• ISO 228 BS 2771 parallel thread (PT)

Basic Information

• Packaging: 20 Kg bags
• Colors: Grey
• Article Number: LA170305002521M

USES

• Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

• Drain Test Kit

• Drain Test Kit

• Builds up pressure of water which forces obstruction clear.

• PE 100 SDR 11 (ISO S5)
• 10 bar Gas / 16 bar Water
• With integral pipe fixation
• 4 mm pin connectors
• Limited path fusion indicators
• Supplied as a kit with ELGEF Plus coupler or *reducer