Search results for: 'gf pvc-u schedule 80 pressure system'

• Material: PVC-C, heat resistant
• Dimension: acc. to DIN 8079/80
• Colour: agate grey RAL 7038
• Pipe length: 5000mm, with plain ends
• Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in considerationwith safety demands of the respective applications and calculated in accordance.

• C-PVC 90° EQUAL TEE 75 MM

• Union End: PVC-C solvent cement socket metric
• Union bush: PVC-C solvent cement socket metric
• Gasket: O-ring EPDM code no. 748 410 005-016, for d90 748 410 248
• Gasket: O-ring FKM code no. 749 410 005 -016, for d90: 749 410 248

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

• Pressure rating: 16 bar water / 10 bar gas

• Pressure rating: 16 bar water / 10 bar gas

• C-PVC END CAP 40MM

• Full-plastic flange PP-GF (30 % glass-fibre reinforced)
• Metric: ISO 7005, EN 1092, ISO 9624
• ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
• Special flange adapter ANSI for d25 - d50 and d90 required

NBR = Nitrile rubberhardness approx. 80° Shore

For all metric GF Flange Adaptors

Rubber-steel body combined with rubber profile cord ring up to d630

Rubber-steel body ideal for big "dimensions (d710 - d1000)

Approved acc. to DVGW standard DIN EN 682 for gas

D corresponds to the centring at the inner diameter of the screw crown

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

• C-PVC 90° EQUAL TEE 32MM

Gasket: flat gasket EPDM code no. 748 400 306-320

Gasket: profile flange gasket EPDM code no. 748 440 706-720FKM code no. 749 440 706-720

Flanges (metric & ANSI): PVC-UPP-V723790111