Search results for: 'accessories-flow restrictor'
Products
Grohe
1/2 IN
Grohe 1/2 IN
- for bath and shower
- without finishing trim set
- wall installation
- GROHE SilkMove 46 mm ceramic cartridge
- adjustable flow rate limiter
- top and bottom outlet 1/2"
- cap included
- diverter in set for final installation
- clockwise thread
In Stock
- for bath and shower
- without finishing trim set
- wall installation
- GROHE SilkMove 46 mm ceramic cartridge
- adjustable flow rate limiter
- top and bottom outlet 1/2"
- cap included
- diverter in set for final installation
- clockwise thread
![ARISTON EWH AURES SM 7.7 [7700 W] [INSTANT]](https://catalyst-dev2.wylog.com/media/catalog/product/cache/503f2f5e25f27962b01fad949171e229/A/T/AT3520220_27.png?t=20260209)
Ariston
7700 W-INSTANT
Ariston 7700 W-INSTANT
- Single Point Installation.
- The Aures Slim Flow is also equipped with a flow regulation knob to set the preferred water temperature.
- Single Point Installation.
- The Aures Slim Flow is also equipped with a flow regulation knob to set the preferred water temperature.
Grohe
3/8 IN
Grohe 3/8 IN
- 3/8"
- universal application
- without adapter for the pipe connection
- cap, restrictor
- **) max. shortening 100 mm
- 3/8"
- universal application
- without adapter for the pipe connection
- cap, restrictor
- **) max. shortening 100 mm
Grohe
1/2 IN
Grohe 1/2 IN
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy 5.7 l/min. flow limiter
- 3 adjustable flow times: short - medium- long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy 5.7 l/min. flow limiter
- 3 adjustable flow times: short - medium- long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
GEORG FISCHER
32 MM
GEORG FISCHER 32 MM
- Double flow rate compared to predecessor
- One housing nut replaces four screws
- Handwheel with built-in locking mechanism
- Flat sealing faces
- Overall length EN 558
- Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, BS 4504 PN 10
- Option:
- Individual configuration of the valve
- Self adjusting multifunctional module withintegrated limit switches
- Double flow rate compared to predecessor
- One housing nut replaces four screws
- Handwheel with built-in locking mechanism
- Flat sealing faces
- Overall length EN 558
- Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, BS 4504 PN 10
- Option:
- Individual configuration of the valve
- Self adjusting multifunctional module withintegrated limit switches
GEORG FISCHER
3 IN
GEORG FISCHER 3 IN
- Sealing at a minimum water column of 2 m
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- For vertical installation
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
- Sealing at a minimum water column of 2 m
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- For vertical installation
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
GEORG FISCHER
3/4 IN
GEORG FISCHER 3/4 IN
- Sealing at a minimum water column of 2 m
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- For vertical installation
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
- Sealing at a minimum water column of 2 m
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- For vertical installation
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
GEORG FISCHER
DN 50
GEORG FISCHER DN 50
- For horizontal or vertical installation
- Sealing at a minimum water column of 1 m
- Spring loaded, spring made of stainless steel (1.4310)
- Spring available in other materials, see spare parts
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
- For horizontal or vertical installation
- Sealing at a minimum water column of 1 m
- Spring loaded, spring made of stainless steel (1.4310)
- Spring available in other materials, see spare parts
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
GEORG FISCHER
20 MM
GEORG FISCHER 20 MM
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
GEORG FISCHER
25 MM
GEORG FISCHER 25 MM
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Note 1: DVGW certification
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.
GEORG FISCHER
DN 50
GEORG FISCHER DN 50
- Sealing at a minimum water column of 2 m
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- For vertical installation
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
- Sealing at a minimum water column of 2 m
- Designed for easy installation and removal
- Vibration free even at high flow velocity
- Flow-optimized return cone, double guided
- For vertical installation
- Compact installation length, same as ball valve type 546
- Z-length, end connectors and union nuts not compatible with type 360
- New DN65-DN100
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- Material: PP-H
- Lockable lever as standard (DN10-DN50)
- For easy installation and removal (valve end and union nut are compatible with type 546)
- Ball seat PTFE
- Angle of operation 360° without turn limiter
- Turn limiter 90° enclosed, in different positions usable as a clip-on ring
- Integrated stainless steel mounting inserts
- Delivery status A-B-C opened, see flow scheme
- Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)
- Material: PP-H
- Lockable lever as standard (DN10-DN50)
- For easy installation and removal (valve end and union nut are compatible with type 546)
- Ball seat PTFE
- Angle of operation 360° without turn limiter
- Turn limiter 90° enclosed, in different positions usable as a clip-on ring
- Integrated stainless steel mounting inserts
- Delivery status A-B-C opened, see flow scheme
- Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)
Filter
Shopping Options