Search results for: 'accessories-mixer handle'
Products
Grohe
1/2 IN
Grohe 1/2 IN
- for bath and shower
- without finishing trim set
- wall installation
- GROHE SilkMove 46 mm ceramic cartridge
- adjustable flow rate limiter
- top and bottom outlet 1/2"
- cap included
- diverter in set for final installation
- clockwise thread
In Stock
- for bath and shower
- without finishing trim set
- wall installation
- GROHE SilkMove 46 mm ceramic cartridge
- adjustable flow rate limiter
- top and bottom outlet 1/2"
- cap included
- diverter in set for final installation
- clockwise thread
Grohe
1/2 IN
Grohe 1/2 IN
- metal handles
- heat insulated
- GROHE StarLight chrome finish
- Longlife headparts
- swivel tubular spout
- swivel area 360‚°
- chain ring
- flexible connection hoses
In Stock
- metal handles
- heat insulated
- GROHE StarLight chrome finish
- Longlife headparts
- swivel tubular spout
- swivel area 360‚°
- chain ring
- flexible connection hoses
Grohe
1/2 IN
Grohe 1/2 IN
- metal handles
- heat insulated
- GROHE StarLight finish
- Longlife headparts
- mousseur
- swivel tubular spout
- swivel area 360‚°
- chain ring
- flexible connection hoses
In Stock
- metal handles
- heat insulated
- GROHE StarLight finish
- Longlife headparts
- mousseur
- swivel tubular spout
- swivel area 360‚°
- chain ring
- flexible connection hoses
Grohe
1/2 IN
Grohe 1/2 IN
- wall mounted
- metal handles
- heat insulated
- GROHE StarLight finish
- Longlife headparts
- swivel tubular spout
- swivel area 360‚°
- S-unions
- wall mounted
- metal handles
- heat insulated
- GROHE StarLight finish
- Longlife headparts
- swivel tubular spout
- swivel area 360‚°
- S-unions
GEORG FISCHER
75 MM
GEORG FISCHER 75 MM
- For ELGEF Plus ball valve d20-d110mm
- Extension spindle acc. to DVGW GW336
- Steel square connection 20x20mm for d20-75
- Steel square connection 25x25mm for d90-d110
- Continuously adjustable and self-supporting
- Pullout- and dirt-safe
- Rod hot-dip galvanized
- PE-casing and PE-centering cap with gasket
- Inclusive clip-pin out of stainless stell
- For ELGEF Plus ball valve d20-d110mm
- Extension spindle acc. to DVGW GW336
- Steel square connection 20x20mm for d20-75
- Steel square connection 25x25mm for d90-d110
- Continuously adjustable and self-supporting
- Pullout- and dirt-safe
- Rod hot-dip galvanized
- PE-casing and PE-centering cap with gasket
- Inclusive clip-pin out of stainless stell
MILWAUKEE
230 MM
MILWAUKEE 230 MM
- Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
- Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
- Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
- FANG TIP™: For faster plunge cutting and reaching into restricted areas.
- NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
- Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
- Thick1.27 mm robust blade body for precise straight cuts.
- 25 mm blade height for improved stability and minimum vibration.
- Best for wood / nails / hardened fastners demolition
- Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
- Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
- Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
- FANG TIP™: For faster plunge cutting and reaching into restricted areas.
- NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
- Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
- Thick1.27 mm robust blade body for precise straight cuts.
- 25 mm blade height for improved stability and minimum vibration.
- Best for wood / nails / hardened fastners demolition
MILWAUKEE
150 MM
MILWAUKEE 150 MM
- Strong: Robust 1.06 mm thick body.
- Shatter resistant: The bi-metal blade body will bend and flex but not break.
- Torch: - Thick 1.06 mm robust blade body for precise cuts in sheet metal and pipes.
- 25 mm blade height for improved stability and minimum vibration.
- Strong: Robust 1.06 mm thick body.
- Shatter resistant: The bi-metal blade body will bend and flex but not break.
- Torch: - Thick 1.06 mm robust blade body for precise cuts in sheet metal and pipes.
- 25 mm blade height for improved stability and minimum vibration.
GEORG FISCHER
1/2 IN
GEORG FISCHER 1/2 IN
- Schedule 40 90° Elbow PVC
- Schedule 40 90° Elbow PVC
GEORG FISCHER
1/2 IN
GEORG FISCHER 1/2 IN
- Schedule 40 45° Elbow PVC
- Schedule 40 45° Elbow PVC
MILWAUKEE
13 MM
MILWAUKEE 13 MM
- Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Step drills are ideal for drilling into the following materials: - Ferrous & non-ferrous sheets metals, profiles and pipes. - Copper, brass and aluminium. - Stainless steel. - Plastics. - Maximum material thickness 4 mm. - To ensure best lifetime we recommend the use of a coolant.
- Trades: - Electrical: drilling of panels and cabinets for cable gland installation. - Plumbing / HVAC: access holes for pipework and installation. - Metal workers / fabrication: various sizes and hole enlargement. - Automotive: holes for cable installation (mobile telephones, antennas, re-directing electrical wiring). - Maintenancerepair operations: various applications, sizes and hole enlargement.
- Step Drill advantages over conventional drill bits: - One drill bit to drill multiple sizes - Do more carry less! - Best option for enlargingexisting holes. - More durable than twist drill bits, thick core resists breakage. - More accurate and less walking, tip starts on contact. - Clean burr free holes, less reaming required. - Drills plastic without splitting or cracking.
- MILWAUKEE‚® Advantages
- Spot drill - Drill - Deburr - All in one go
- RAPID STRIKE TIP™: Accurate start without walking and fast drilling without the need to pre-drill the material.
- Special tip and step geometry for jam-free performance - less risk of drill snagging when used with high speed cordless tools and also prevents deformation of the drilled material.
- Optimised 2 flute groundsharpened edge geometry for 2 x faster and smoother cutting.
- Produced from custom engineered steel with black oxide coating for 4 x longer life.
- Optimised for use with high speed cordless drills.
- Laser engraved size markings for best long term visibility.
- Each step is relief ground to drill and deburr automatically.
- With 3 flat secure grip to prevent step drill from slipping in the chuck and ensure maximum transmission of torque.
- Step drills are ideal for drilling into the following materials: - Ferrous & non-ferrous sheets metals, profiles and pipes. - Copper, brass and aluminium. - Stainless steel. - Plastics. - Maximum material thickness 4 mm. - To ensure best lifetime we recommend the use of a coolant.
- Trades: - Electrical: drilling of panels and cabinets for cable gland installation. - Plumbing / HVAC: access holes for pipework and installation. - Metal workers / fabrication: various sizes and hole enlargement. - Automotive: holes for cable installation (mobile telephones, antennas, re-directing electrical wiring). - Maintenancerepair operations: various applications, sizes and hole enlargement.
- Step Drill advantages over conventional drill bits: - One drill bit to drill multiple sizes - Do more carry less! - Best option for enlargingexisting holes. - More durable than twist drill bits, thick core resists breakage. - More accurate and less walking, tip starts on contact. - Clean burr free holes, less reaming required. - Drills plastic without splitting or cracking.
- MILWAUKEE‚® Advantages
- Spot drill - Drill - Deburr - All in one go
- RAPID STRIKE TIP™: Accurate start without walking and fast drilling without the need to pre-drill the material.
- Special tip and step geometry for jam-free performance - less risk of drill snagging when used with high speed cordless tools and also prevents deformation of the drilled material.
- Optimised 2 flute groundsharpened edge geometry for 2 x faster and smoother cutting.
- Produced from custom engineered steel with black oxide coating for 4 x longer life.
- Optimised for use with high speed cordless drills.
- Laser engraved size markings for best long term visibility.
- Each step is relief ground to drill and deburr automatically.
- With 3 flat secure grip to prevent step drill from slipping in the chuck and ensure maximum transmission of torque.
Filter
Shopping Options