Search results for: 'gf machines and tools'

• Ideal for a wide range of breaking and demolition work of concrete or breeze block.

• Ideal for a wide range of breaking and cutting of concrete as well as demolition work.

• Suitable for applications in wood and metal.

• Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
• Parabolic web cross section: Large web thickness. Strength built in.
• Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
• 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
• Impact resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque equalling less breakages.

• Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
• QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Colour: bronze.

SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

Best fitting thanks to 6 gripping points.

Recessed corners allow torque to be transferred across the flats of the socket rather than producing stress on the points or corners.

Thin wall construction provides access to tight spaces.'

Laser etched size markings for easy identification andwon't wear off.

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

• SDS PLUS 3PC CHISEL SET

• Colour coded for easy identification.
• Made from high quality alloy steel for strength and durability.
• Set includes 1/2"³ impact sockets of 17 mm, 19 mm and 21 mm length.

• NF C 20-130 for copper compression cable lugs

• Charges MILWAUKEE‚® batteries on the go, perfect for tradesmen and other professional that can use the down time to re-charge their batteries using conventional 12V sockets
• Recharges all M18™ and M12™ REDLITHIUM™ battery packs
• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
• M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah /6.0 Ah battery packs recharge in 40 min / 70 min / 80 min / 90 min or less
• M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 40 min / 80 min / 100 min / 124 min/ 180 min or less

• Most compact MILWAUKEE‚® charger charges all M12™ battery packs
• Charges electronic devices via 2.1A USB output
• Powers all MILWAUKEE‚® heated gear
• REDLITHIUM™ 1.5 Ah / 2.0 Ah / 3.0 Ah battery packs recharge in 2 hrs. / 2.5 hrs / 4 hrs. or less
• USB wall socket and 90 cm USB cable included