Search results for: 'gf pp pressure system'

• Material: PVC-C, heat resistant
• Dimension: acc. to DIN 8079/80
• Colour: agate grey RAL 7038
• Pipe length: 5000mm, with plain ends
• Note 1: DVGW certification
• Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.

• Material: PVC-C, heat resistant
• Dimension: acc. to DIN 8079/80
• Colour: agate grey RAL 7038
• Pipe length: 5000mm, with plain ends
• Note 1: DVGW certification
• Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.

Material: PP-H

Protects valvespumpsetc. from becoming soiled

Easy dismantling for cleaning the screens

Screen perforation 0.5 mm

For easy installation and removal

Overall "167305199

• POWERSTATE™ brushless motor delivers the power of AC trim routers, max. 31,000 rpm for powerful, smooth cutting
• Variable speed dial allows users to adjust the speed between 10,000 and 31,000 rpm to choose the best control for the application at hand
• All day run time on a single charge of an M18™ 5.0 Ah battery (up to 115m)
• Innovative height adjustment system incorporating a 0.4 mm micro adjustment
• Active brake stops the router bit quickly
• Included plunge base features 3 stop pins for multiple pass mortising
• Dual LED lights to illuminate the work surface
• Compatible with the dust collection shroud (DEK 26)
• Supplied with 2 x dust extraction attachments, 146 mm sub-baseplate which accepts 31.75 mm guide bushings, 6 mm and 6.35mm collets, plunge base, 2 x side fences
• Integrates three MILWAUKEE‚®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries

• Material: PP-H
• Lockable lever as standard (DN10-DN50)
• For easy installation and removal (valve end and union nut are compatible with type 546)
• Ball seat PTFE
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
• Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)

Material: PP-H

Double flow rate compared to predecessor

One housing nut replaces four screws

Rotating air connection at 90° intervals

Joining faces flat/serrated

Overall length"EN 558

Connecting dimension: ISO 7005 PN 10EN 1092 PN 10167627114

• 10 bar Gas / 16 bar Water
• d160 up to d225 are supplied with base plate and straps
• d1 = diameter of bore
• Regarding pressure rate and application local standardsand regulations have to be considered

• 10 bar Gas / 16 bar Water
• Branch Saddle installation only with installation set Topload TL225 (799.300.807)
• Angle adaptors (799.350.340) for fusion cable required
• 4 mm pin connectors
• Limited path fusion indicators
• Spigot outlet for butt- and electrofusion
• Full pressure applicable - no derating factor
• With integrated pressure test port for test cap (799.199.287)

• 10 bar Gas / 16 bar Water
• With integrated drill bit to tap live mains under pressure
• Complete with lower part and premounted PE100 coated valve piece
• The valveis closed clockwise
• Number of turns to fully open or close valve is 13 for outlet d32
• Number of turns to fully open or close valve is 28 for outlet d63
• Spindle size (SW) 14
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet

• PE 100 SDR 11 (ISO S5)
• 10 bar Gas / 16 bar Water
• With integral pipe fixation
• 4 mm pin connectors
• Limited path fusion indicators
• Delivered as akit. Further combinations: modular system with threaded adapter and (150 228-1) reductions

• PE 100 SDR 11 (ISO S5)
• 10 bar Gas / 16 bar Water
• With integral pipe fixation
• 4 mm pin connectors
• Limited path fusion indicators
• Delivered as akit. Further combinations: modular system with threaded adapter and (150 228-1) reductions

• Material: PP-H
• Conventional butt-welding according to DVS 2207
• IR = Infrared welding compatible
• Long version for d250, d280 and d315