Search results for: 'water heating-instant'
Products
GEORG FISCHER
63-1 IN
GEORG FISCHER 63-1 IN
- water PN16-10
- suitable for PE and PVC pipes
- material: PP
- female thread: ISO 7 (parallel)
- gasket: O-ring with flat lip (NBR)
- reinforcement ring:stainless steel AISI430
- bolts and nuts : stainless steel
- colour: blue
- B= N° of bolts
- M= bolt type
- (*) with O-ring gasket
- water PN16-10
- suitable for PE and PVC pipes
- material: PP
- female thread: ISO 7 (parallel)
- gasket: O-ring with flat lip (NBR)
- reinforcement ring:stainless steel AISI430
- bolts and nuts : stainless steel
- colour: blue
- B= N° of bolts
- M= bolt type
- (*) with O-ring gasket
GEORG FISCHER
200 MM
GEORG FISCHER 200 MM
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
GEORG FISCHER
250 MM
GEORG FISCHER 250 MM
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
MILWAUKEE
13 MM
MILWAUKEE 13 MM
- Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
GEORG FISCHER
160 MM
GEORG FISCHER 160 MM
- 10 bar Gas / 16 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
- Two separate fusion zones
- 10 bar Gas / 16 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
- Two separate fusion zones
GEORG FISCHER
32 MM
GEORG FISCHER 32 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
GEORG FISCHER
40 MM
GEORG FISCHER 40 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
GEORG FISCHER
125 MM
GEORG FISCHER 125 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
GEORG FISCHER
315 MM
GEORG FISCHER 315 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
GEORG FISCHER
110 x 90 MM
GEORG FISCHER 110 x 90 MM
- Pressure rating: 10 bar water / 5 bar gas
- Pressure rating: 10 bar water / 5 bar gas
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152
Filter
Shopping Options