Search results for: 'water heating-vertical'

For horizontal or vertical installation

Sealing at a minimum water column of 1 m

Spring loadedspring made of stainless steel (1.4310)

Spring available in other materialssee spare parts

• Material: PVC-C, heat resistant
• Dimension: acc. to DIN 8079/80
• Colour: agate grey RAL 7038
• Pipe length: 5000mm, with plain ends
• Note 1: DVGW certification
• Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.

• Material: PVC-C, heat resistant
• Dimension: acc. to DIN 8079/80
• Colour: agate grey RAL 7038
• Pipe length: 5000mm, with plain ends
• Note 1: DVGW certification
• Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in consideration with safety demands of the respective applications and calculated in accordance.

• Sealing at a minimum water column of 2 m
• Designed for easy installation and removal
• Vibration free even at high flow velocity
• Flow-optimized return cone, double guided
• For vertical installation
• Compact installation length, same as ball valve type 546
• Z-length, end connectors and union nuts not compatible with type 360
• New DN65-DN100

• water PN16-10
• suitable for PE and PVC pipes
• material: PP
• female thread: ISO 7 (parallel)
• gasket: O-ring with flat lip (NBR)
• reinforcement ring:stainless steel AISI430
• bolts and nuts : stainless steel
• colour: blue
• B= N° of bolts
• M= bolt type
• (*) with O-ring gasket

• 10 bar Gas / 16 bar Water
• FM 1613 approved - 15 bar

• 10 bar Gas / 16 bar Water
• FM 1613 approved - 15 bar

• Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

• Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

• 10 bar Gas / 16 bar Water
• 4 mm pin connectors
• Limited path fusion indicators
• Two separate fusion zones

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)