Search results for: 'cpvc pipe'

• CPVC REDUCING BUSH SPXFT 1/2X1/4"

• CPVC REDUCER BUSH SPXS 6X4"

• CPVC REDUCER BUSH SPXS 8X6"

connector set 3/8"

for copper pipe 10 mm

TDL handles

marking: neutral

escutcheon

GROHE StarLight finish

• Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
• Single band clamp with full circle gasket
• All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
• The rubber gasket is available in NBR (EPDM on request)
• Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
• For working pressures in GAS please consult Georg Fischer Waga N.V.
• To choose the correct length of Multi/Clamp check our technical information

• adjustment ex factory 6 l and 3 l
• pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
• water supply from left/right/back or top
• low noise (group I acc. to German Noise Specification)
• insulated against condensation
• ½" water supply connection including integrated angle valve and push fit flexible hose union
• notools required for installation of inspection shaft
• for vertical or horizontal use
• flush pipe insulated against condensation
• fixing brackets
• for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately

• 10 bar Gas / 16 bar Water
• Integral pipe fixation (up to d63)
• 4 mm pin connectors
• Limited path fusion indicators
• Supplied as kit including ELGEF Plus Coupler or ELGEF Plus Reducer

• 10 bar Gas / 16 bar Water
• Integral pipe fixation (up to d63)
• 4 mm pin connectors
• Limited path fusion indicators
• Supplied as kit including ELGEF Plus Coupler or ELGEF Plus Reducer

• 10 bar Gas / 16 bar Water
• Integral pipe fixation (up to d63)
• 4 mm pin connectors
• Limited path fusion indicators
• Supplied as kit including ELGEF Plus Coupler or ELGEF Plus Reducer

• 10 bar Gas / 16 bar Water
• Integral pipe fixation (up to d63)
• 4 mm pin connectors
• Limited path fusion indicators
• Supplied as kit including ELGEF Plus Coupler or ELGEF Plus Reducer

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

• concealed installation
• (‚¾")
• stop valve
• 6 - 14 l adjustable
• for low pressure
• for wash-down and wash-out bowls
• flow pressure range from0.6 - 3.0 bar (min. static pressure 1.5 bar)
• with flow rate adjustment
• box for concealed installation with flush elbow
• flush pipe adjustable in length
• without wall plate/actuation
• volume needed: 1.6 l/sec