Search results for: 'grohe standard'

• GROHE TurboStat compact cartridge with wax thermoelement

• for cold or premixed water
• marking: blue/red
• GROHE StarLight chrome finish
• GROHE EcoJoy 5.7 l/min. flow limiter
• 3 adjustable flow times: short - medium- long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)

• wall mounted
• metal handles
• heat insulated
• GROHE StarLight finish
• Longlife headparts
• swivel tubular spout
• swivel area 360‚°
• S-unions

• for concealed cistern
• horizontal outlet
• GROHE Triple Vortex flushing technology
• wash down
• rimless
• flush volume 3/5 l
• including fixationset
• sanitary ware
• fully skirted with invisible fixation
• optional: PureGuard anti scale coating and anti bacterial glazing (00H)
• compatible with seat and cover 39 330 001 (soft close) or 39 331 001 (standard)

• Lockable lever as standard (DN10-DN50)
• For easy installation and removal (valve end and union nut are compatible with type 546)
• Ball seat PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts

• POWERSTATE™ brushless motor delivers the power of AC trim routers, max. 31,000 rpm for powerful, smooth cutting
• Variable speed dial allows users to adjust the speed between 10,000 and 31,000 rpm to choose the best control for the application at hand
• All day run time on a single charge of an M18™ 5.0 Ah battery (up to 115m)
• Innovative height adjustment system incorporating a 0.4 mm micro adjustment
• Active brake stops the router bit quickly
• Included plunge base features 3 stop pins for multiple pass mortising
• Dual LED lights to illuminate the work surface
• Compatible with the dust collection shroud (DEK 26)
• Supplied with 2 x dust extraction attachments, 146 mm sub-baseplate which accepts 31.75 mm guide bushings, 6 mm and 6.35mm collets, plunge base, 2 x side fences
• Integrates three MILWAUKEE‚®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries

• Material: PP-H
• Lockable lever as standard (DN10-DN50)
• For easy installation and removal (valve end and union nut are compatible with type 546)
• Ball seat PTFE
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
• Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)

• 10 bar Gas / 16 bar Water
• Branch Saddle installation only with installation set Topload TL225 (799.300.807)
• Angle adaptors (799.350.340) for fusion cable required
• 4 mm pin connectors
• Limited path fusion indicators
• Spigot outlet for butt- and electrofusion
• Full pressure applicable - no derating factor
• With integrated pressure test port for test cap (799.199.287)

• Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
• Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
• Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
• FANG TIP™: For faster plunge cutting and reaching into restricted areas.
• NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
• Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
• Thick1.27 mm robust blade body for precise straight cuts.
• 25 mm blade height for improved stability and minimum vibration.
• Best for wood / nails / hardened fastners demolition

NBR = Nitrile rubberhardness approx. 80° Shore

For all metric GF Flange Adaptors

Rubber-steel body combined with rubber profile cord ring up to d630

Rubber-steel body ideal for big "dimensions (d710 - d1000)

Approved acc. to DVGW standard DIN EN 682 for gas

D corresponds to the centring at the inner diameter of the screw crown

NBR = Nitrile rubberhardness approx. 80° Shore

For all metric GF Flange Adaptors

Rubber-steel body combined with rubber profile cord ring up to d630

Rubber-steel body ideal for big "dimensions (d710 - d1000)

Approved acc. to DVGW standard DIN EN 682 for gas

D corresponds to the centring at the inner diameter of the screw crown

• Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.