Search results for: 'water heating-oversink'
Products
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
- Parabolic web cross section: Large web thickness. Strength built in.
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
- 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
- Impact resistant ABS case with added rubber corner protection.
- Accepts higher feed pressure and torque equalling less breakages.
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
- Parabolic web cross section: Large web thickness. Strength built in.
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
- 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
- Impact resistant ABS case with added rubber corner protection.
- Accepts higher feed pressure and torque equalling less breakages.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
- Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
- QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- 3-flat shank from 5 mm for better grip and prevents chuck slippage.
- Colour: bronze.
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
- Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
- QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- 3-flat shank from 5 mm for better grip and prevents chuck slippage.
- Colour: bronze.
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
Grohe
1/2 IN
Grohe 1/2 IN
- single hole installation
- Touch: activation of cold water via skin contact
- battery supply 6 V lithium-battery, type CR-P2
- CE approved
- indication of battery status by different impulses
- safety shutdown circuit
- solenoid valve
- automatic safety stop after 60 sec. (factory set)
- type of protection IP 44
- GROHE StarLight finish
- GROHE SilkMove 46 mm ceramic cartridge
- C-spout
- adjustable flow rate limiter
- swivel tubular spout
- swivel area 360‚°
- pull-out mousseur spray
- automatic returning
- integrated non-return valve
- diverter: laminar spray/SpeedClean shower jet
- automatic return to laminar spray
- flexible connection hoses
- rapid installation system
- protected against backflow
- optional:
- upgrade for Touch function with mixed water:
- Grohtherm Micro 34 487 000
- connection set 47 533 000
- min. recommended pressure 1.0 bar
- single hole installation
- Touch: activation of cold water via skin contact
- battery supply 6 V lithium-battery, type CR-P2
- CE approved
- indication of battery status by different impulses
- safety shutdown circuit
- solenoid valve
- automatic safety stop after 60 sec. (factory set)
- type of protection IP 44
- GROHE StarLight finish
- GROHE SilkMove 46 mm ceramic cartridge
- C-spout
- adjustable flow rate limiter
- swivel tubular spout
- swivel area 360‚°
- pull-out mousseur spray
- automatic returning
- integrated non-return valve
- diverter: laminar spray/SpeedClean shower jet
- automatic return to laminar spray
- flexible connection hoses
- rapid installation system
- protected against backflow
- optional:
- upgrade for Touch function with mixed water:
- Grohtherm Micro 34 487 000
- connection set 47 533 000
- min. recommended pressure 1.0 bar
Grohe
1/2 IN
Grohe 1/2 IN
- high spout
- GROHE StarLight chrome finish
- GROHE SilkMove 35 mm ceramic cartridge
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- adjustable flow rate limiter
- swivel tubular spout
- selectable swivel area: 0‚° / 150‚°
- flexible connection hoses
- GROHE FastFixation installation system
- high spout
- GROHE StarLight chrome finish
- GROHE SilkMove 35 mm ceramic cartridge
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- adjustable flow rate limiter
- swivel tubular spout
- selectable swivel area: 0‚° / 150‚°
- flexible connection hoses
- GROHE FastFixation installation system
Grohe
1/2 IN
Grohe 1/2 IN
- wall mounted
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- flow limiter 5.7 l/min
- 3 adjustable flow times: short - medium - long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
- wall mounted
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- flow limiter 5.7 l/min
- 3 adjustable flow times: short - medium - long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
Grohe
1/2 IN
Grohe 1/2 IN
- with infrared sensor for bi-directional communication for monitoring, configuration and service purpose
- 6V lithium battery, type CR-P2
- battery lifetime: approx. 7 years (150 actuations a day)
- GROHE StarLight chrome finish
- GROHE EcoJoy mousseur 5.7 l/min
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- body made of compositepolymer
- flexible connection hoses
- non-return valve
- dirt strainers
- integrated solenoid valve
- external battery
- rapid installation system
- multistage battery status display
- 7 pre-set programs:
- auto flush
- thermal disinfection
- cleaning mode
- additional functions and precise settings by remote control 36 407
- CE approved
- type of protection faucet IP 59
- with infrared sensor for bi-directional communication for monitoring, configuration and service purpose
- 6V lithium battery, type CR-P2
- battery lifetime: approx. 7 years (150 actuations a day)
- GROHE StarLight chrome finish
- GROHE EcoJoy mousseur 5.7 l/min
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- body made of compositepolymer
- flexible connection hoses
- non-return valve
- dirt strainers
- integrated solenoid valve
- external battery
- rapid installation system
- multistage battery status display
- 7 pre-set programs:
- auto flush
- thermal disinfection
- cleaning mode
- additional functions and precise settings by remote control 36 407
- CE approved
- type of protection faucet IP 59
Grohe
STANDARD
Grohe STANDARD
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
Grohe
156 X 197 MM
Grohe 156 X 197 MM
- for dual flush
- for pneumatic discharge valve AV1
- vertical and horizontal installation
- 156 x 197 mm
- ABS
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- for combination with Rapid SL and Uniset with GD 2 cisterns
- for use with Rapid SLX please order shaft 66 791 000 (sold separately)
- for dual flush
- for pneumatic discharge valve AV1
- vertical and horizontal installation
- 156 x 197 mm
- ABS
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- for combination with Rapid SL and Uniset with GD 2 cisterns
- for use with Rapid SLX please order shaft 66 791 000 (sold separately)
GEORG FISCHER
250 MM
GEORG FISCHER 250 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Most compact MILWAUKEE‚® charger charges all M12™ battery packs
- Charges electronic devices via 2.1A USB output
- Powers all MILWAUKEE‚® heated gear
- REDLITHIUM™ 1.5 Ah / 2.0 Ah / 3.0 Ah battery packs recharge in 2 hrs. / 2.5 hrs / 4 hrs. or less
- USB wall socket and 90 cm USB cable included
- Most compact MILWAUKEE‚® charger charges all M12™ battery packs
- Charges electronic devices via 2.1A USB output
- Powers all MILWAUKEE‚® heated gear
- REDLITHIUM™ 1.5 Ah / 2.0 Ah / 3.0 Ah battery packs recharge in 2 hrs. / 2.5 hrs / 4 hrs. or less
- USB wall socket and 90 cm USB cable included
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
- SHOCK ZONE™ Geometry - designed to flex:
- SHOCK ZONE™reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
- Custom engineered steel - Milwaukee‚® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
- Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
- SHOCK ZONE™ Geometry - designed to flex:
- SHOCK ZONE™reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
- Custom engineered steel - Milwaukee‚® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
Filter
Shopping Options