Search results for: 'water heating-vertical'
Products
GEORG FISCHER
125 MM
GEORG FISCHER 125 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
GEORG FISCHER
315 MM
GEORG FISCHER 315 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
GEORG FISCHER
110 x 90 MM
GEORG FISCHER 110 x 90 MM
- Pressure rating: 10 bar water / 5 bar gas
- Pressure rating: 10 bar water / 5 bar gas
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
- Parabolic web cross section: Large web thickness. Strength built in.
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
- 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
- Impact resistant ABS case with added rubber corner protection.
- Accepts higher feed pressure and torque equalling less breakages.
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
- Parabolic web cross section: Large web thickness. Strength built in.
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
- 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
- Impact resistant ABS case with added rubber corner protection.
- Accepts higher feed pressure and torque equalling less breakages.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
- Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
- QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- 3-flat shank from 5 mm for better grip and prevents chuck slippage.
- Colour: bronze.
- Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
- Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
- QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- 3-flat shank from 5 mm for better grip and prevents chuck slippage.
- Colour: bronze.
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
Grohe
1/2 IN
Grohe 1/2 IN
- single hole installation
- Touch: activation of cold water via skin contact
- battery supply 6 V lithium-battery, type CR-P2
- CE approved
- indication of battery status by different impulses
- safety shutdown circuit
- solenoid valve
- automatic safety stop after 60 sec. (factory set)
- type of protection IP 44
- GROHE StarLight finish
- GROHE SilkMove 46 mm ceramic cartridge
- C-spout
- adjustable flow rate limiter
- swivel tubular spout
- swivel area 360‚°
- pull-out mousseur spray
- automatic returning
- integrated non-return valve
- diverter: laminar spray/SpeedClean shower jet
- automatic return to laminar spray
- flexible connection hoses
- rapid installation system
- protected against backflow
- optional:
- upgrade for Touch function with mixed water:
- Grohtherm Micro 34 487 000
- connection set 47 533 000
- min. recommended pressure 1.0 bar
- single hole installation
- Touch: activation of cold water via skin contact
- battery supply 6 V lithium-battery, type CR-P2
- CE approved
- indication of battery status by different impulses
- safety shutdown circuit
- solenoid valve
- automatic safety stop after 60 sec. (factory set)
- type of protection IP 44
- GROHE StarLight finish
- GROHE SilkMove 46 mm ceramic cartridge
- C-spout
- adjustable flow rate limiter
- swivel tubular spout
- swivel area 360‚°
- pull-out mousseur spray
- automatic returning
- integrated non-return valve
- diverter: laminar spray/SpeedClean shower jet
- automatic return to laminar spray
- flexible connection hoses
- rapid installation system
- protected against backflow
- optional:
- upgrade for Touch function with mixed water:
- Grohtherm Micro 34 487 000
- connection set 47 533 000
- min. recommended pressure 1.0 bar
Grohe
1/2 IN
Grohe 1/2 IN
- high spout
- GROHE StarLight chrome finish
- GROHE SilkMove 35 mm ceramic cartridge
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- adjustable flow rate limiter
- swivel tubular spout
- selectable swivel area: 0‚° / 150‚°
- flexible connection hoses
- GROHE FastFixation installation system
- high spout
- GROHE StarLight chrome finish
- GROHE SilkMove 35 mm ceramic cartridge
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- adjustable flow rate limiter
- swivel tubular spout
- selectable swivel area: 0‚° / 150‚°
- flexible connection hoses
- GROHE FastFixation installation system
Grohe
1/2 IN
Grohe 1/2 IN
- wall mounted
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- flow limiter 5.7 l/min
- 3 adjustable flow times: short - medium - long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
- wall mounted
- for cold or premixed water
- marking: blue/red
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- flow limiter 5.7 l/min
- 3 adjustable flow times: short - medium - long (factory setting: short), approx. 7, 15, 30 sec (pressure dependent)
Grohe
1/2 IN
Grohe 1/2 IN
- with infrared sensor for bi-directional communication for monitoring, configuration and service purpose
- 6V lithium battery, type CR-P2
- battery lifetime: approx. 7 years (150 actuations a day)
- GROHE StarLight chrome finish
- GROHE EcoJoy mousseur 5.7 l/min
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- body made of compositepolymer
- flexible connection hoses
- non-return valve
- dirt strainers
- integrated solenoid valve
- external battery
- rapid installation system
- multistage battery status display
- 7 pre-set programs:
- auto flush
- thermal disinfection
- cleaning mode
- additional functions and precise settings by remote control 36 407
- CE approved
- type of protection faucet IP 59
- with infrared sensor for bi-directional communication for monitoring, configuration and service purpose
- 6V lithium battery, type CR-P2
- battery lifetime: approx. 7 years (150 actuations a day)
- GROHE StarLight chrome finish
- GROHE EcoJoy mousseur 5.7 l/min
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- body made of compositepolymer
- flexible connection hoses
- non-return valve
- dirt strainers
- integrated solenoid valve
- external battery
- rapid installation system
- multistage battery status display
- 7 pre-set programs:
- auto flush
- thermal disinfection
- cleaning mode
- additional functions and precise settings by remote control 36 407
- CE approved
- type of protection faucet IP 59
Grohe
STANDARD
Grohe STANDARD
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
Filter
Shopping Options