Search results for: 'check valve'
Products
GEORG FISCHER
125 MM
GEORG FISCHER 125 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
GEORG FISCHER
315 MM
GEORG FISCHER 315 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
Grohe
1/2 IN
Grohe 1/2 IN
connector set 3/8"
for copper pipe 10 mm
TDL handles
marking: neutral
escutcheon
GROHE StarLight finish
connector set 3/8"
for copper pipe 10 mm
TDL handles
marking: neutral
escutcheon
GROHE StarLight finish
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
GROHE SENA TRIGGER SPRAY 35, SPRAY SET WITH SELF CLOSING ANGLE VALVE, 1 SPRAY | CHROME, 1250 MM HOSE
Grohe
1250 MM
Grohe 1250 MM
- Consisting of:
- hand shower with trigger control (26 328)
- valve with integrated shower holder (26 333 000)
- Silverflex Longlife shower hose 1250 mm (26 335)
- GROHE StarLight chrome finish
- SpeedClean anti-limescale system
- Twistfree preventing the hose from twisting
- Min. recommended pressure 0.5 bar
- Please refer to local norms regarding installation.
- Consisting of:
- hand shower with trigger control (26 328)
- valve with integrated shower holder (26 333 000)
- Silverflex Longlife shower hose 1250 mm (26 335)
- GROHE StarLight chrome finish
- SpeedClean anti-limescale system
- Twistfree preventing the hose from twisting
- Min. recommended pressure 0.5 bar
- Please refer to local norms regarding installation.
Grohe
3/4 IN
Grohe 3/4 IN
- pre-assembled headpart 3/4"
- short spindle
- protection sleeve
- thread union 3/4"
- DR-brass
- pre-assembled headpart 3/4"
- short spindle
- protection sleeve
- thread union 3/4"
- DR-brass
Grohe
1/2 IN
Grohe 1/2 IN
- for concealed installation
- marking: blue/red
- GROHE StarLight chrome finish
- 3 adjustable flow times: short - medium - long (factory setting: medium), approx. 7,15, 30 sec (pressure dependent)
- for concealed installation
- marking: blue/red
- GROHE StarLight chrome finish
- 3 adjustable flow times: short - medium - long (factory setting: medium), approx. 7,15, 30 sec (pressure dependent)
Grohe
1/2 IN
Grohe 1/2 IN
- 15 mm (½")
- chrome plated brass
- GROHE StarLight chrome finish
- with wall escutcheon
- 15 mm (½")
- chrome plated brass
- GROHE StarLight chrome finish
- with wall escutcheon
Grohe
7/8 IN
Grohe 7/8 IN
- retrofit unit for close-coupled flushing cisterns
- connection from the side
- with filling valve, servo discharge valve
- interruptible flush cycle
- fixing set with 100 mm screws and cellular rubber joint 100 mm dia.
- centring for filling and discharge valve when having larger bore holes
- GROHE StarLight chrome finish
- **) max. shortening 100 mm
- retrofit unit for close-coupled flushing cisterns
- connection from the side
- with filling valve, servo discharge valve
- interruptible flush cycle
- fixing set with 100 mm screws and cellular rubber joint 100 mm dia.
- centring for filling and discharge valve when having larger bore holes
- GROHE StarLight chrome finish
- **) max. shortening 100 mm
Grohe
STANDARD
Grohe STANDARD
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
- adjustment ex factory 6 l and 3 l
- pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
- water supply from left/right/back or top
- low noise (group I acc. to German Noise Specification)
- insulated against condensation
- ½" water supply connection including integrated angle valve and push fit flexible hose union
- notools required for installation of inspection shaft
- for vertical or horizontal use
- flush pipe insulated against condensation
- fixing brackets
- for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately
Grohe
156 X 197 MM
Grohe 156 X 197 MM
- for dual flush
- for pneumatic discharge valve AV1
- vertical and horizontal installation
- 156 x 197 mm
- ABS
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- for combination with Rapid SL and Uniset with GD 2 cisterns
- for use with Rapid SLX please order shaft 66 791 000 (sold separately)
- for dual flush
- for pneumatic discharge valve AV1
- vertical and horizontal installation
- 156 x 197 mm
- ABS
- GROHE StarLight chrome finish
- GROHE EcoJoy for less water and perfect flow
- for combination with Rapid SL and Uniset with GD 2 cisterns
- for use with Rapid SLX please order shaft 66 791 000 (sold separately)
GEORG FISCHER
250 MM
GEORG FISCHER 250 MM
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
Filter
Shopping Options