Search results for: 'equilibrium float valve'

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

connector set 3/8"

for copper pipe 10 mm

TDL handles

marking: neutral

escutcheon

GROHE StarLight finish

• Consisting of:
• hand shower with trigger control (26 328)
• valve with integrated shower holder (26 333 000)
• Silverflex Longlife shower hose 1250 mm (26 335)
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Twistfree preventing the hose from twisting
• Min. recommended pressure 0.5 bar
• Please refer to local norms regarding installation.

• pre-assembled headpart 3/4"
• short spindle
• protection sleeve
• thread union 3/4"
• DR-brass

• for concealed installation
• marking: blue/red
• GROHE StarLight chrome finish
• 3 adjustable flow times: short - medium - long (factory setting: medium), approx. 7,15, 30 sec (pressure dependent)

• 15 mm (½")
• chrome plated brass
• GROHE StarLight chrome finish
• with wall escutcheon

• retrofit unit for close-coupled flushing cisterns
• connection from the side
• with filling valve, servo discharge valve
• interruptible flush cycle
• fixing set with 100 mm screws and cellular rubber joint 100 mm dia.
• centring for filling and discharge valve when having larger bore holes
• GROHE StarLight chrome finish
• **) max. shortening 100 mm

• adjustment ex factory 6 l and 3 l
• pneumatic discharge valve offering 3 modes of operation: dual flush or start/stop or single flush
• water supply from left/right/back or top
• low noise (group I acc. to German Noise Specification)
• insulated against condensation
• ½" water supply connection including integrated angle valve and push fit flexible hose union
• notools required for installation of inspection shaft
• for vertical or horizontal use
• flush pipe insulated against condensation
• fixing brackets
• for mounting of small flush plates revision shaft 40 911 000 needs to be ordered separately

• for dual flush
• for pneumatic discharge valve AV1
• vertical and horizontal installation
• 156 x 197 mm
• ABS
• GROHE StarLight chrome finish
• GROHE EcoJoy for less water and perfect flow
• for combination with Rapid SL and Uniset with GD 2 cisterns
• for use with Rapid SLX please order shaft 66 791 000 (sold separately)

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

• Powerful 18V motor delivers over 690 bar max. operating pressure
• REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
• Extreme long run time - dispenses up to 7 cartridges per charge
• Strong handle balance and ergonomics - only 355 mm long and 3.9 kg
• Air bleeder valve - priming mechanism for quick flow
• Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and reducing down time
• Three way loading - bulk, cartridge and suction capable
• Grease capacity 400 ml cartridge, 473 ml bulk
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance todeliver more run time and more work over pack life
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries
• Supplied with 1219 mm high pressure flex hose with spring guard