Search results for: 'water heating-under sink'

Products

To place an order, simply add your selected items to the wishlist and submit them for a quotation.

FLANGE ADAPTOR PE100 SDR11 315MM

Brand: GEORG FISCHER

Size: 315 MM

Brand: GEORG FISCHER | Size: 315 MM

For IR, butt and electrofusion welding according to DVS 2207
Type A: without chamfer
Type B: with chamfer
Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
Profile seal: d20-d800 NBR, EPDM, FKM
Flat gasket: d20-d315 EPDM, FKM
Pressure rating: 16 bar water / 10 bar gas
Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
FM 1613 approved - PN 15

Check availability

For IR, butt and electrofusion welding according to DVS 2207
Type A: without chamfer
Type B: with chamfer
Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
Profile seal: d20-d800 NBR, EPDM, FKM
Flat gasket: d20-d315 EPDM, FKM
Pressure rating: 16 bar water / 10 bar gas
Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
FM 1613 approved - PN 15

PE100 B/F REDUCER LS SDR17 110X90MM

Brand: GEORG FISCHER

Size: 110 x 90 MM

Brand: GEORG FISCHER | Size: 110 x 90 MM

Pressure rating: 10 bar water / 5 bar gas

Check availability

Pressure rating: 10 bar water / 5 bar gas

MILWAUKEE 14PCS HOLESAW SET

Brand: MILWAUKEE

Size: STANDARD

Brand: MILWAUKEE | Size: STANDARD

Cutting edge technology for maximum productivity.
Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
Diagonal slots aid the removaland ejection of the core.
Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152

Check availability

Cutting edge technology for maximum productivity.
Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
Diagonal slots aid the removaland ejection of the core.
Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152

MILWAUKEE HSS-G DRILL BITS (25-PIECE). PLASTIC CASSETTE

Brand: MILWAUKEE

Size: STANDARD

Brand: MILWAUKEE | Size: STANDARD

Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.

Check availability

Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
Parabolic web cross section: Large web thickness. Strength built in.
Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
Impact resistant ABS case with added rubber corner protection.
Accepts higher feed pressure and torque equalling less breakages.

MILWAUKEE HSS GROUND COBALT DRILL BIT DIN 338 |25 PC SET

Brand: MILWAUKEE

Size: STANDARD

Brand: MILWAUKEE | Size: STANDARD

Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
3-flat shank from 5 mm for better grip and prevents chuck slippage.
Colour: bronze.

Check availability

Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
3-flat shank from 5 mm for better grip and prevents chuck slippage.
Colour: bronze.

MC SINGLE 48- 55 L=200 NBR

Brand: GEORG FISCHER

Size: STANDARD

Brand: GEORG FISCHER | Size: STANDARD

Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
Single band clamp with full circle gasket
All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
The rubber gasket is available in NBR (EPDM on request)
Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
For working pressures in GAS please consult Georg Fischer Waga N.V.
To choose the correct length of Multi/Clamp check our technical information

Check availability

Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
Single band clamp with full circle gasket
All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
The rubber gasket is available in NBR (EPDM on request)
Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
For working pressures in GAS please consult Georg Fischer Waga N.V.
To choose the correct length of Multi/Clamp check our technical information