Search results for: 'grohe standard'

Product Details

• Type: All Purpose Cleaner
• Item Package Quantity: 1
• Item Volume: 946 Milliliters
• Temperature application range is O°F - 110°F
• Article Number:PCC-70

Product Description

All of your All Purpose Cleaners needs in the UAE will be satisfied by Parabond C-70 500 ml PVC All Purpose Cleaner, ATC-214. with a ton of features and top-notch performance You won't be dissatisfied with Parabond C-70 500 ml PVC All Purpose Cleaner, ATC-214. One of Parabond's top Cleaning & Housekeeping/Cleaning Chemicals/All-Purpose Cleaners is this item. This cleaner is formulated tobe used with Parabond' PVC, CPVC and ASS solvent cement products. Cleaning the pipe and fitting prior to cementing always yields better results. The cleaner should be used to remove dirt, oil, grease and other foreignmaterial from the surface of the pipe and fittings to be cemented. This will insure a clean joint enabling the installer to apply a uniform amount of cement for a strong, tight joint.

• Material: PP-H
• Conventional butt-welding according to DVS 2207
• IR- Infrared welding compatible
• Suitable for flange connections to ANSI/ASME B 16.5
• Up to d315, suitable for butterfly valve type 567/578 and 038/039. Above use PROGEF Standard adaptor for butterfly valves SDR11 (d355-d500)
• Gasket: profile flange gasket EPDM No. 48 44 07, FKM No. 49 44 07

NBR = Nitrile rubberhardness approx. 80° Shore

For all metric GF Flange Adaptors

Rubber-steel body combined with rubber profile cord ring up to d630

Rubber-steel body ideal for big "dimensions (d710 - d1000)

Approved acc. to DVGW standard DIN EN 682 for gas

D corresponds to the centring at the inner diameter of the screw crown

• The Hand Scraper can be used to prepare the fusion zone on PE80 pipes.

• 10 bar Gas / 16 bar Water
• Branch Saddle installation only with installation set Topload TL225 (799.300.807)
• Angle adaptors (799.350.340) for fusion cable required
• 4 mm pin connectors
• Limited path fusion indicators
• Spigot outlet for butt- and electrofusion
• Full pressure applicable - no derating factor
• With integrated pressure test port for test cap (799.199.287)

NBR = Nitrile rubberhardness approx. 80° Shore

For all metric GF Flange Adaptors

Rubber-steel body combined with rubber profile cord ring up to d630

Rubber-steel body ideal for big "dimensions (d710 - d1000)

Approved acc. to DVGW standard DIN EN 682 for gas

D corresponds to the centring at the inner diameter of the screw crown

NBR = Nitrile rubberhardness approx. 80° Shore

For all metric GF Flange Adaptors

Rubber-steel body combined with rubber profile cord ring up to d630

Rubber-steel body ideal for big "dimensions (d710 - d1000)

Approved acc. to DVGW standard DIN EN 682 for gas

D corresponds to the centring at the inner diameter of the screw crown

• Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
• Single band clamp with full circle gasket
• All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
• The rubber gasket is available in NBR (EPDM on request)
• Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
• For working pressures in GAS please consult Georg Fischer Waga N.V.
• To choose the correct length of Multi/Clamp check our technical information