Search results for: 'accessories-flush set'

Product Details

• Without connector set 1/2
• For Copper Pipe: Ø 10 mm
• TDL Handles
• Marking: Neutral
• Escutcheon
• GROHE Long-Life Finish
• Colour : Chrome
• Article Number: GH22940

Product Description

Introducing the GH22940 GROHE Angle Valve without Compression Nut. This valve is specifically designed for use with copper pipes measuring Ø 10 mm. It features TDL handles for easy operation and comes with a neutral marking for convenient identification. The valve includes an escutcheon for a secure and polished installation. With the GROHE Long-LifeFinish and a chrome color, this angle valve offers durability and adds a touch of elegance to your plumbing setup.

22940

Product Details:

• Installation Type: Monobloc installation
• Metal lever
• GROHE Long-Life 28 mm ceramic cartridge
• GROHE Long-Life finish
• GROHE Water Saving mousseur 5.7 l/min
• Rapid installation system
• Plastic pop-up waste set 1 1/4
• Flexible connection hoses
• Article Number: 2375800F

• GROHE SilkMove 35 mm ceramic cartridge
• adjustable flow rate limiter
• with temperature limiter
• GROHE StarLight chrome finish
• GROHE EcoJoy mousseur 5.7 l/min
• GROHE FastFixation installation system
• with ball joint
• pop-up waste set 1 1/4"
• flexible connection hoses

• Suitable for sinks, wash basins, bath, bidets, single point
• showers, hair wash sprays and domestic hot water systems
• Simple to install and service
• Temperaturepre-set to 43ºC, but easily adjustable on site
• WRAS approved for a wide variety of uses
• Complies with NHS Model Engineering Specification DO8
• Choice of standard, easy to service union connectionsor 90º
• angle valve combination
• 15mm and 22mm sizes.

metal handles
• heat insulated
• screwable
• Longlife headpart
• swivel tubular spout with mousseur
• pop-up waste set 1 1/4"
• flexible connection hoses
• GROHE StarLight chrome finish

• for wall hung WC
• connecting pipeƒ 45 mm
• waste sleeveƒ 90 mm
• 150 mm long
• cover for WC fixing bolts

• single hole installation
• GROHE SilkMove 28 mm ceramic cartridge
• GROHE StarLight chrome finish
• GROHE EcoJoy 6.0 l/min. flow limiter
• rapid installation system
• mousseur
• pop-up waste set 1 1/4"
• flexible connection hoses

• 3 outlets 1/2"
• 2 inlets below, 1/2"
• installation depth 75-105 mm
• connection unit in DR brass
• pre-mounted flushing plug
• stable build-in box andprotective cover
• fixing options for solid walls and dry cladding
• gasket
• without set for final installation

• retrofit unit for close-coupled flushing cisterns
• connection from below
• with filling valve, servo discharge valve
• interruptible flush cycle
• fixing setwith 100 mm screws and cellular rubber joint 100 mm dia.
• centring for filling and discharge valve when having larger bore holes
• GROHE StarLight chrome finish
• **) max. shortening 100 mm

Basic Information

• Packaging: 20 Kg bags
• Colors: Grey
• Article Number: LA170305002521M

USES

• Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

• Builds up pressure of water which forces obstruction clear.

• Builds up pressure of water which forces obstruction clear.