Search results for: 'cut off saws'
Products
Grohe
1/2 IN
Grohe 1/2 IN
- 15 mm (½")
- chrome plated brass
- integrated stop valve
- GROHE StarLight chrome finish
- with control cap and flush pipe connection
- flow rate adjustment
- flush volume adjustable 1.0 - 4.0 l
- with wall escutcheon
- flush pipe 200 mm
- rubber connector with escutcheon
- flow pressure min 0.5 bar
- operating pressure max 5 bar minimum 1"™"™ supply pipe
In Stock
- 15 mm (½")
- chrome plated brass
- integrated stop valve
- GROHE StarLight chrome finish
- with control cap and flush pipe connection
- flow rate adjustment
- flush volume adjustable 1.0 - 4.0 l
- with wall escutcheon
- flush pipe 200 mm
- rubber connector with escutcheon
- flow pressure min 0.5 bar
- operating pressure max 5 bar minimum 1"™"™ supply pipe
Grohe
STANDARD
Grohe STANDARD
- Consisting of:
- horizontal 450 mm shower arm
- upper bracket adjustable for minimal adaption to existing drilling holes
- exposed SmartControl thermostat
- allows change between:
- head shower Rainshower SmartActive 310
- 2 spray patterns:
- GROHE PureRain, ActiveRain
- hand shower Euphoria 110 Massage, spray plate white (27 221 001)
- 3 spray patterns:
- Rain, SmartRain, Massage
- adjustable height via gliding element
- Silverflex shower hose 1750 mm (28 388 000)
- GROHE DreamSpray perfect spray pattern
- GROHE StarLight chrome finish
- GROHE CoolTouch prevents scalding on hot surfaces
- GROHE TurboStat compact cartridge with wax thermoelement
- GROHE ProGrip with knurl structure
- GROHE EcoJoy technology for less water andperfect flow
- - GROHE SafeStop at 38‚°C
- GROHE SafeStop Plus optional temperature limiter at 43‚°C included
- GROHE SmartControl push for ON-OFF, turn for volume adjustment from EcoJoy to full flow
- integrated GROHE EasyReach shower tray
- SpeedClean anti-limescale system
- Inner WaterGuide for a longer life
- Twistfree preventing the hose from twisting
- suitable for instantaneous heaters from 18 kW/h
- minimum flow rate 7 l/min.
In Stock
- Consisting of:
- horizontal 450 mm shower arm
- upper bracket adjustable for minimal adaption to existing drilling holes
- exposed SmartControl thermostat
- allows change between:
- head shower Rainshower SmartActive 310
- 2 spray patterns:
- GROHE PureRain, ActiveRain
- hand shower Euphoria 110 Massage, spray plate white (27 221 001)
- 3 spray patterns:
- Rain, SmartRain, Massage
- adjustable height via gliding element
- Silverflex shower hose 1750 mm (28 388 000)
- GROHE DreamSpray perfect spray pattern
- GROHE StarLight chrome finish
- GROHE CoolTouch prevents scalding on hot surfaces
- GROHE TurboStat compact cartridge with wax thermoelement
- GROHE ProGrip with knurl structure
- GROHE EcoJoy technology for less water andperfect flow
- - GROHE SafeStop at 38‚°C
- GROHE SafeStop Plus optional temperature limiter at 43‚°C included
- GROHE SmartControl push for ON-OFF, turn for volume adjustment from EcoJoy to full flow
- integrated GROHE EasyReach shower tray
- SpeedClean anti-limescale system
- Inner WaterGuide for a longer life
- Twistfree preventing the hose from twisting
- suitable for instantaneous heaters from 18 kW/h
- minimum flow rate 7 l/min.
GEORG FISCHER
110 MM
GEORG FISCHER 110 MM
- For cutting plastic pipes d10 - d160
In Stock
- For cutting plastic pipes d10 - d160
![MILWAUKEE M18 FUEL TRIM ROUTER [BARE-TOOL]](https://catalyst-dev2.wylog.com/media/catalog/product/cache/503f2f5e25f27962b01fad949171e229/M/I/MIL4933471604_0_56.jpg?t=20260206)
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- POWERSTATE™ brushless motor delivers the power of AC trim routers, max. 31,000 rpm for powerful, smooth cutting
- Variable speed dial allows users to adjust the speed between 10,000 and 31,000 rpm to choose the best control for the application at hand
- All day run time on a single charge of an M18™ 5.0 Ah battery (up to 115m)
- Innovative height adjustment system incorporating a 0.4 mm micro adjustment
- Active brake stops the router bit quickly
- Included plunge base features 3 stop pins for multiple pass mortising
- Dual LED lights to illuminate the work surface
- Compatible with the dust collection shroud (DEK 26)
- Supplied with 2 x dust extraction attachments, 146 mm sub-baseplate which accepts 31.75 mm guide bushings, 6 mm and 6.35mm collets, plunge base, 2 x side fences
- Integrates three MILWAUKEE‚®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite
- Flexible battery system: works with all MILWAUKEE‚® M18™ batteries
- POWERSTATE™ brushless motor delivers the power of AC trim routers, max. 31,000 rpm for powerful, smooth cutting
- Variable speed dial allows users to adjust the speed between 10,000 and 31,000 rpm to choose the best control for the application at hand
- All day run time on a single charge of an M18™ 5.0 Ah battery (up to 115m)
- Innovative height adjustment system incorporating a 0.4 mm micro adjustment
- Active brake stops the router bit quickly
- Included plunge base features 3 stop pins for multiple pass mortising
- Dual LED lights to illuminate the work surface
- Compatible with the dust collection shroud (DEK 26)
- Supplied with 2 x dust extraction attachments, 146 mm sub-baseplate which accepts 31.75 mm guide bushings, 6 mm and 6.35mm collets, plunge base, 2 x side fences
- Integrates three MILWAUKEE‚®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite
- Flexible battery system: works with all MILWAUKEE‚® M18™ batteries
GEORG FISCHER
63 MM
GEORG FISCHER 63 MM
- 10 bar Gas / 16 bar Water
- d160 up to d225 are supplied with base plate and straps
- d1 = diameter of bore
- Regarding pressure rate and application local standardsand regulations have to be considered
- 10 bar Gas / 16 bar Water
- d160 up to d225 are supplied with base plate and straps
- d1 = diameter of bore
- Regarding pressure rate and application local standardsand regulations have to be considered
MILWAUKEE
230 MM
MILWAUKEE 230 MM
- Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
- Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
- Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
- FANG TIP™: For faster plunge cutting and reaching into restricted areas.
- NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
- Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
- Thick1.27 mm robust blade body for precise straight cuts.
- 25 mm blade height for improved stability and minimum vibration.
- Best for wood / nails / hardened fastners demolition
- Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
- Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
- Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
- FANG TIP™: For faster plunge cutting and reaching into restricted areas.
- NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
- Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
- Thick1.27 mm robust blade body for precise straight cuts.
- 25 mm blade height for improved stability and minimum vibration.
- Best for wood / nails / hardened fastners demolition
MILWAUKEE
150 MM
MILWAUKEE 150 MM
- Strong: Robust 1.06 mm thick body.
- Shatter resistant: The bi-metal blade body will bend and flex but not break.
- Torch: - Thick 1.06 mm robust blade body for precise cuts in sheet metal and pipes.
- 25 mm blade height for improved stability and minimum vibration.
- Strong: Robust 1.06 mm thick body.
- Shatter resistant: The bi-metal blade body will bend and flex but not break.
- Torch: - Thick 1.06 mm robust blade body for precise cuts in sheet metal and pipes.
- 25 mm blade height for improved stability and minimum vibration.
MILWAUKEE
13 MM
MILWAUKEE 13 MM
- Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
- Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
- Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
- QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
- Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
- Enhanced tapered web: Widercore towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Especially engineered blades for exclusive use on 12 V HACKZALL™.
- Bi-Metal construction for increased tooth durability.
- Optimised tooth form for aggressive and fastercutting.
- Thinner blade body for better speed of cut and up to 35% more cuts per charge vs. standard Bi Metal blades.
- 75 mm scraper: for removing strong adhesive silicon, caulk, paint and rust.
- 125mm wide scraper: for removing glue, silicon, caulk, vinyl, rust, paint and wallpaper.
- Grout removal blade: for removing damaged or moulded grout between tiles.
- Especially engineered blades for exclusive use on 12 V HACKZALL™.
- Bi-Metal construction for increased tooth durability.
- Optimised tooth form for aggressive and fastercutting.
- Thinner blade body for better speed of cut and up to 35% more cuts per charge vs. standard Bi Metal blades.
- 75 mm scraper: for removing strong adhesive silicon, caulk, paint and rust.
- 125mm wide scraper: for removing glue, silicon, caulk, vinyl, rust, paint and wallpaper.
- Grout removal blade: for removing damaged or moulded grout between tiles.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152
MILWAUKEE
400 MM
MILWAUKEE 400 MM
- Ideal for a wide range of breaking and cutting of concrete as well as demolition work.
- Ideal for a wide range of breaking and cutting of concrete as well as demolition work.
Filter
Shopping Options