Search results for: 'value added service'

• Suitable for sinks, wash basins, bath, bidets, single point
• showers, hair wash sprays and domestic hot water systems
• Simple to install and service
• Temperaturepre-set to 43ºC, but easily adjustable on site
• WRAS approved for a wide variety of uses
• Complies with NHS Model Engineering Specification DO8
• Choice of standard, easy to service union connectionsor 90º
• angle valve combination
• 15mm and 22mm sizes.

Basic Information

• Packaging: 20 Kg bags
• Colors: Grey
• Article Number: LA170305002521M

USES

• Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

• with infrared sensor for bi-directional communication for monitoring, configuration and service purpose
• 6V lithium battery, type CR-P2
• battery lifetime: approx. 7 years (150 actuations a day)
• cartridge with solenoid valve and dirt strainer
• front plate 116 x 144 mm
• flow pressure min 0.5 bar
• operating pressure max 10 bar
• multistage battery statusdisplay
• 7 pre-set programs:
• auto flush
• cleaning mode
• pre-flush on/off
• additional functions and precise settings by remote control 36 407
• adjustable flow time by hand or remote
• set for final installation
• for Rapido U or Rapido UMB
• CE approved

• 10 bar Gas / 16 bar Water
• With integrated cutter to tap live mains under pressure
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet
• O-ring-sealed screw cap
• Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
• d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.

• 10 bar Gas / 16 bar Water
• With integrated cutter to tap live mains under pressure
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet
• O-ring-sealed screw cap
• Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
• d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.

• 10 bar Gas / 16 bar Water
• With integrated cutter to tap live mains under pressure
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet
• O-ring-sealed screw cap
• Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
• d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.

• 10 bar Gas / 16 bar Water
• With integrated cutter to tap live mains under pressure
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet
• O-ring-sealed screw cap
• Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
• d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.

• 10 bar Gas / 16 bar Water
• With integrated cutter to tap live mains under pressure
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet
• O-ring-sealed screw cap
• Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
• d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.

• 10 bar Gas / 16 bar Water
• With integrated cutter to tap live mains under pressure
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet
• O-ring-sealed screw cap
• Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
• d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.

• The first cordless right angle die grinder that delivers more power vs. pneumatic models
• Compact size (only 119 mm long) to help fit in tight places, and offers great mobilityand access
• Features a 4-mode speed control and responsive variable speed trigger enabling outstanding control
• To be used with discs up to50 mm
• Supplied with 6 and 8 mm collets'
• The DNA ofour FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE‚®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™electronic intelligence delivering outstanding power, run time anddurabilityFlexible battery system: works with all MILWAUKEE‚® M12™ batteries

• Brushless POWERSTATE™ motor for up to 2x longer motor life and up to 25% more power
• REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tooland battery and uniquely enhances the tool performance under load
• REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Second hardest hitting SDS hammer in its class. Powerful hammer mechanism delivers 2.5 J of impact energy at low 8.9 m/s‚² vibrations
• Compact, ergonomic design for increased end user comfort
• All metal gear case - optimum seating of the gears for enhanced service life
• 4-mode operation: rotary hammer, hammer only, rotation only and selectable work position of the chisel (variolock) for maximum versatility
• FIXTEC™ system - keyless chuck changing
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Fuel gauge displays remaining charge
• Compatible with M18 CDEX dust extractor
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries

• Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
• Parabolic web cross section: Large web thickness. Strength built in.
• Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
• 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
• Impact resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque equalling less breakages.