Search results for: 'water heating-under sink'

Product Details:

• Installation Type: Monobloc installation
• Metal lever
• GROHE Long-Life 28 mm ceramic cartridge
• GROHE Long-Life finish
• GROHE Water Saving mousseur 5.7 l/min
• Rapid installation system
• Plastic pop-up waste set 1 1/4
• Flexible connection hoses
• Article Number: 2375800F

• BS5154 PN20 series B
• non-rising stem
• high quality lubricated packing
• 1/2" to 4" sizes
• solid brass wedge
• can be re-packed under pressure
• forged brass body
• ISO7-1Rc taper thread BS EN 10226
• ANSI (NPT) American taper thread (AT)
• BS2779 parallel thread (PT)

• Suitable for sinks, wash basins, bath, bidets, single point
• showers, hair wash sprays and domestic hot water systems
• Simple to install and service
• Temperaturepre-set to 43ºC, but easily adjustable on site
• WRAS approved for a wide variety of uses
• Complies with NHS Model Engineering Specification DO8
• Choice of standard, easy to service union connectionsor 90º
• angle valve combination
• 15mm and 22mm sizes.

• Pressure rating: 16 bar water / 10 bar gas

• Material: PVC-C, heat resistant
• Dimension: acc. to DIN 8079/80
• Colour: agate grey RAL 7038
• Pipe length: 5000mm, with plain ends
• Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in considerationwith safety demands of the respective applications and calculated in accordance.

Basic Information

• Packaging: 20 Kg bags
• Colors: Grey
• Article Number: LA170305002521M

USES

• Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

• 10 bar Gas / 16 bar Water
• FM 1613 approved - 15 bar

• Pressure rating: 16 bar water / 10 bar gas

• For IR, butt and electrofusion welding according to DVS 2207
• Type A: without chamfer
• Type B: with chamfer
• Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
• Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
• Profile seal: d20-d800 NBR, EPDM, FKM
• Flat gasket: d20-d315 EPDM, FKM
• Pressure rating: 16 bar water / 10 bar gas
• Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
• FM 1613 approved - PN 15

• Pressure rating: 16 bar water / 10 bar gas

• 10 bar Gas / 16 bar Water
• FM 1613 approved - 15 bar

• Builds up pressure of water which forces obstruction clear.