Products
GEORG FISCHER
200 MM
GEORG FISCHER 200 MM
"
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
"
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
GEORG FISCHER
75 MM
GEORG FISCHER 75 MM
- For ELGEF Plus ball valve d20-d110mm
- Extension spindle acc. to DVGW GW336
- Steel square connection 20x20mm for d20-75
- Steel square connection 25x25mm for d90-d110
- Continuously adjustable and self-supporting
- Pullout- and dirt-safe
- Rod hot-dip galvanized
- PE-casing and PE-centering cap with gasket
- Inclusive clip-pin out of stainless stell
- For ELGEF Plus ball valve d20-d110mm
- Extension spindle acc. to DVGW GW336
- Steel square connection 20x20mm for d20-75
- Steel square connection 25x25mm for d90-d110
- Continuously adjustable and self-supporting
- Pullout- and dirt-safe
- Rod hot-dip galvanized
- PE-casing and PE-centering cap with gasket
- Inclusive clip-pin out of stainless stell
GEORG FISCHER
25 MM
GEORG FISCHER 25 MM
- Hardness approx. 65° Shore
- Dimension size "inch" correspond with the thread dimension "G" of the tank adaptor
In Stock
- Hardness approx. 65° Shore
- Dimension size "inch" correspond with the thread dimension "G" of the tank adaptor
GEORG FISCHER
From [6 x 4 IN] to [3 x 2 IN]
GEORG FISCHER From [6 x 4 IN] to [3 x 2 IN]
- CPVC REDUCER BUSH SPXFT 2X11/2"
In Stock
- CPVC REDUCER BUSH SPXFT 2X11/2"
GEORG FISCHER
From [63 x 2 MM TO INCH] to [32 x 1 MM]
GEORG FISCHER From [63 x 2 MM TO INCH] to [32 x 1 MM]
- With solvent cement socket metric and parallel female thread Rp
- Reinforcing ring stainless (A2)
- Connection to plastic or metal threads
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
In Stock
- With solvent cement socket metric and parallel female thread Rp
- Reinforcing ring stainless (A2)
- Connection to plastic or metal threads
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
GEORG FISCHER
From [63 MM] to [50 MM]
GEORG FISCHER From [63 MM] to [50 MM]
- Union End: PVC-C solvent cement socket metric
- Union bush: PVC-C solvent cement socket metric
- Gasket: O-ring EPDM code no. 748 410 005-016, for d90 748 410 248
- Gasket: O-ring FKM code no. 749 410 005 -016, for d90: 749 410 248
In Stock
- Union End: PVC-C solvent cement socket metric
- Union bush: PVC-C solvent cement socket metric
- Gasket: O-ring EPDM code no. 748 410 005-016, for d90 748 410 248
- Gasket: O-ring FKM code no. 749 410 005 -016, for d90: 749 410 248
GEORG FISCHER
From [32 MM] to [25 MM]
GEORG FISCHER From [32 MM] to [25 MM]
- C-PVC SOLVENT SOCKET 75MM
In Stock
- C-PVC SOLVENT SOCKET 75MM
GEORG FISCHER
From [40 x 32 MM] to [32 x 25 MM]
GEORG FISCHER From [40 x 32 MM] to [32 x 25 MM]
- With solvent cement spigot and socket metric
In Stock
- With solvent cement spigot and socket metric
GEORG FISCHER
From [40 MM] to [32 MM]
GEORG FISCHER From [40 MM] to [32 MM]
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in considerationwith safety demands of the respective applications and calculated in accordance.
In Stock
- Material: PVC-C, heat resistant
- Dimension: acc. to DIN 8079/80
- Colour: agate grey RAL 7038
- Pipe length: 5000mm, with plain ends
- Attention: Pressure rates refer to operating temperatures at 20°C. Higher temperatures and aggressive flow media reduce pressure load (see above DIN and our technical documentation). Pressure load capacity has to be determined in considerationwith safety demands of the respective applications and calculated in accordance.
GEORG FISCHER
25 MM
GEORG FISCHER 25 MM
- Protects valves, pumps, etc. from becoming soiled
- Easy dismantling for cleaning the screens
- Overall length EN 558
- Cylindrical screen must be ordered separately
- Protects valves, pumps, etc. from becoming soiled
- Easy dismantling for cleaning the screens
- Overall length EN 558
- Cylindrical screen must be ordered separately
GEORG FISCHER
From [20 MM] to [63 MM]
GEORG FISCHER From [20 MM] to [63 MM]
"
Gasket: flat gasket EPDM code no. 748 400 306-320
Gasket: profile flange gasket EPDM code no. 748 440 706-720FKM code no. 749 440 706-720
Flanges (metric & ANSI): PVC-UPP-V
In Stock
"
Gasket: flat gasket EPDM code no. 748 400 306-320
Gasket: profile flange gasket EPDM code no. 748 440 706-720FKM code no. 749 440 706-720
Flanges (metric & ANSI): PVC-UPP-V
GEORG FISCHER
From [40 MM] to [75 MM]
GEORG FISCHER From [40 MM] to [75 MM]
- C-PVC END CAP 40MM
In Stock
- C-PVC END CAP 40MM
