Products
GEORG FISCHER
25 x 20 MM
GEORG FISCHER 25 x 20 MM
- 5045 25-20 REDUCING BUSH
In Stock
- 5045 25-20 REDUCING BUSH
GEORG FISCHER
From [125 MM] to [160 MM]
GEORG FISCHER From [125 MM] to [160 MM]
- PB COUPLER E/F 125MM
In Stock
- PB COUPLER E/F 125MM
GEORG FISCHER
110 MM
GEORG FISCHER 110 MM
- For cutting plastic pipes d10 - d160
In Stock
- For cutting plastic pipes d10 - d160
GEORG FISCHER
110 MM
GEORG FISCHER 110 MM
- Universal peeling for the preparation of all electrofusion joints
- For pipe ends and saddles
- Materials: PE 80, PE100, PE100-RC, PE-X, PP
- Universal peeling for the preparation of all electrofusion joints
- For pipe ends and saddles
- Materials: PE 80, PE100, PE100-RC, PE-X, PP
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- The Hand Scraper can be used to prepare the fusion zone on PE80 pipes.
In Stock
- The Hand Scraper can be used to prepare the fusion zone on PE80 pipes.
GEORG FISCHER
10 IN
GEORG FISCHER 10 IN
- UPVC SCH80 TEE 90° SXS 10"
In Stock
- UPVC SCH80 TEE 90° SXS 10"
GEORG FISCHER
10 IN
GEORG FISCHER 10 IN
- UPVC SCH80 ELBOW 90° SXS 10"
- UPVC SCH80 ELBOW 90° SXS 10"
GEORG FISCHER
10 IN
GEORG FISCHER 10 IN
- UPVC SCH80 ELBOW 45° SXS 10"
In Stock
- UPVC SCH80 ELBOW 45° SXS 10"
GEORG FISCHER
10 IN
GEORG FISCHER 10 IN
- UPVC SCH80 COUPLING SXS 10"
- UPVC SCH80 COUPLING SXS 10"
GEORG FISCHER
From [3 x 1-1/2 IN] to [21/2 x 2 IN]
GEORG FISCHER From [3 x 1-1/2 IN] to [21/2 x 2 IN]
- UPVC SCH80 REDUCER BUSH SPGXS 21/2X2
In Stock
- UPVC SCH80 REDUCER BUSH SPGXS 21/2X2
GEORG FISCHER
10 IN
GEORG FISCHER 10 IN
- ANSI 150 Class according to ANSI B16.5
- 1/2" - 12" pressure rating is 150 psi @ 73°F (10.3 bar @ 22.7°C)
- 14" - 24" pressure rating is 100 psi @ 73°F (6.9 bar @ 22.7°C)- Steel Ring
- HC = Honeycomb (Face)
- ANSI 150 Class according to ANSI B16.5
- 1/2" - 12" pressure rating is 150 psi @ 73°F (10.3 bar @ 22.7°C)
- 14" - 24" pressure rating is 100 psi @ 73°F (6.9 bar @ 22.7°C)- Steel Ring
- HC = Honeycomb (Face)
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
- Parabolic web cross section: Large web thickness. Strength built in.
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
- 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
- Impact resistant ABS case with added rubber corner protection.
- Accepts higher feed pressure and torque equalling less breakages.
- Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
- Parabolic web cross section: Large web thickness. Strength built in.
- Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
- 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
- Impact resistant ABS case with added rubber corner protection.
- Accepts higher feed pressure and torque equalling less breakages.
Filter
Shopping Options