Products
GEORG FISCHER
From [90 MM] to [160 MM]
GEORG FISCHER From [90 MM] to [160 MM]
- Supporting eyelets for simple fitting
- Suitable for vertical and horizontal mounting
In Stock
- Supporting eyelets for simple fitting
- Suitable for vertical and horizontal mounting
GEORG FISCHER
From [75 MM] to [160 MM]
GEORG FISCHER From [75 MM] to [160 MM]
- Up to DN 300: Overall length according to EN558 (DN 50-200: line 25, DN250, 300 line 16), ISO 5752
- Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
- We recommend for the dimensions DN250 and DN300 only 6 bar maximum system pressure for the hand lever version
In Stock
- Up to DN 300: Overall length according to EN558 (DN 50-200: line 25, DN250, 300 line 16), ISO 5752
- Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
- We recommend for the dimensions DN250 and DN300 only 6 bar maximum system pressure for the hand lever version
GEORG FISCHER
160 MM
GEORG FISCHER 160 MM
- 10 bar Gas / 16 bar Water
- With integrated drill bit to tap live mains under pressure
- Complete with lower part and premounted PE100 coated valve piece
- The valveis closed clockwise
- Number of turns to fully open or close valve is 13 for outlet d32
- Number of turns to fully open or close valve is 28 for outlet d63
- Spindle size (SW) 14
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
- 10 bar Gas / 16 bar Water
- With integrated drill bit to tap live mains under pressure
- Complete with lower part and premounted PE100 coated valve piece
- The valveis closed clockwise
- Number of turns to fully open or close valve is 13 for outlet d32
- Number of turns to fully open or close valve is 28 for outlet d63
- Spindle size (SW) 14
- 4 mm pin connectors
- Limited path fusion indicators
- Long fusion outlet
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- Material: PP-H
- Lockable lever as standard (DN10-DN50)
- For easy installation and removal (valve end and union nut are compatible with type 546)
- Ball seat PTFE
- Angle of operation 360° without turn limiter
- Turn limiter 90° enclosed, in different positions usable as a clip-on ring
- Integrated stainless steel mounting inserts
- Delivery status A-B-C opened, see flow scheme
- Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)
- Material: PP-H
- Lockable lever as standard (DN10-DN50)
- For easy installation and removal (valve end and union nut are compatible with type 546)
- Ball seat PTFE
- Angle of operation 360° without turn limiter
- Turn limiter 90° enclosed, in different positions usable as a clip-on ring
- Integrated stainless steel mounting inserts
- Delivery status A-B-C opened, see flow scheme
- Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)
PEGLER
22 MM
PEGLER 22 MM
- Suitable for sinks, wash basins, bath, bidets, single point
- showers, hair wash sprays and domestic hot water systems
- Simple to install and service
- Temperaturepre-set to 43ºC, but easily adjustable on site
- WRAS approved for a wide variety of uses
- Complies with NHS Model Engineering Specification DO8
- Choice of standard, easy to service union connectionsor 90º
- angle valve combination
- 15mm and 22mm sizes.
In Stock
- Suitable for sinks, wash basins, bath, bidets, single point
- showers, hair wash sprays and domestic hot water systems
- Simple to install and service
- Temperaturepre-set to 43ºC, but easily adjustable on site
- WRAS approved for a wide variety of uses
- Complies with NHS Model Engineering Specification DO8
- Choice of standard, easy to service union connectionsor 90º
- angle valve combination
- 15mm and 22mm sizes.
PEGLER
From [4 1/2 IN, 5/16 IN] to [8 IN, 3/8 IN]
PEGLER From [4 1/2 IN, 5/16 IN] to [8 IN, 3/8 IN]
- PLASTIC FLOAT WHIT
In Stock
- PLASTIC FLOAT WHIT
PEGLER
From [1/2 IN] to [3/4 IN]
PEGLER From [1/2 IN] to [3/4 IN]
- crutch top
- Brass body
In Stock
- crutch top
- Brass body
PEGLER
1/2 IN
PEGLER 1/2 IN
- type A to BS 2879/2
- male taper thread to BS 21
In Stock
- type A to BS 2879/2
- male taper thread to BS 21
PEGLER
DN 100
PEGLER DN 100
- BS EN 1171:2002
- flanged to EN1092-2
- PN16 all sizes
- ductile iron gate valve
- bronze (gunmetal) seat and trim
- stainless steel stem
- non-rising
- ductile iron body
- BS EN 1171:2002
- flanged to EN1092-2
- PN16 all sizes
- ductile iron gate valve
- bronze (gunmetal) seat and trim
- stainless steel stem
- non-rising
- ductile iron body
PEGLER
From [DN 200] to [DN 300]
PEGLER From [DN 200] to [DN 300]
- all sizes rated PN16
- stainless steel disc and stem
- quarter turn
- EPDM liner
- fully lugged to BS EN 593:2004
- face to face dimension to BS EN 558:2008
In Stock
- all sizes rated PN16
- stainless steel disc and stem
- quarter turn
- EPDM liner
- fully lugged to BS EN 593:2004
- face to face dimension to BS EN 558:2008
PEGLER
From [8 IN] to [16 IN]
PEGLER From [8 IN] to [16 IN]
- plastic or copper ball
- stud or claw attachment
In Stock
- plastic or copper ball
- stud or claw attachment
PEGLER
From [1 1/4 IN] to [4 IN]
PEGLER From [1 1/4 IN] to [4 IN]
- PN25 to 1/2 to 2"
- PN16 2 1/2 to 4"
- full bore
- quarter turn operation
- red lever handle
- 1/2 to 4" sizes
- PTFE ball seals
- brass body
- PTFE gland
- taper thread BS EN 10226 (ISO7-1)
- ISO 228 BS 2771 parallel thread (PT)
In Stock
- PN25 to 1/2 to 2"
- PN16 2 1/2 to 4"
- full bore
- quarter turn operation
- red lever handle
- 1/2 to 4" sizes
- PTFE ball seals
- brass body
- PTFE gland
- taper thread BS EN 10226 (ISO7-1)
- ISO 228 BS 2771 parallel thread (PT)
