• Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
• SHOCK ZONE™ Geometry - designed to flex:
• SHOCK ZONE™reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• Custom engineered steel - Milwaukee‚® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.

• Easy to use one person point and shoot system
• IP54 water & dust protection
• Auto shut off and low power indication
• Metric & Imperial units of measurement
• Very slim housing design with belt clip for easy transport
• Two easy to touch measure buttons on the front and side of the housing
• Enables user to perform single measurements & continuous tracking
• Large 3 line LCD graphical display with automatic white backlight
• Display shows last three measurements

• Cutting edge technology for maximum productivity.
• Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
• Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
• Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
• Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
• Diagonal slots aid the removaland ejection of the core.
• Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152MIL49224152

• More power, more compact, more control
• Up to 339Nm of maximum torque
• 1/2" anvil with friction ring for quick and easy socket changes
• Brushless POWERSTATE™ motor delivers more power in a more compact size
• REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Individual battery cell monitoring optimises tool run timeand ensures long term pack durability
• Better access in tight spaces with an overall length of only 124.5mm
• 4-Mode DRIVE CONTROL with auto-shut off mode, offers the user precise control
• Bright LEDworkspace illumination
• Flexible battery system: works with all MILWAUKEE‚® M12™ batteries

• Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
• Single band clamp with full circle gasket
• All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
• The rubber gasket is available in NBR (EPDM on request)
• Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
• For working pressures in GAS please consult Georg Fischer Waga N.V.
• To choose the correct length of Multi/Clamp check our technical information

• Delivers the power to cut at the same rate of an equivalent AC 305mm saw, with the ability to cut up to 500 pieces of 78mm pine base board on one 12.0 Ah battery charge
• The HIGH OUTPUT™ system of tools elevates the M18 FUEL™ technologies to a new level and delivers extended performance and extended run time. These tools are designed to maximise the partnership with HIGH OUTPUT™ batteries
• Large sliding fences gives maximum support to the material being cut providing stability and accuracy
• Trenching stop with depth adjustment allows the user to make trenching and rebate cuts
• ONE-KEY™ tool tracking & security offers a free of charge cloud-based tracking network and inventory management platform for your tools. ONE-KEY™ also features a remote locking functionality
• Integrated carry handle allows easy transportation on and off the jobsite
• Steel detent plate with preset angles gives repeatable accurate cuts
• LED light to illuminate the work piece and cut line in low light conditions
• Flexiblebattery system: works with all MILWAUKEE‚® M18™ batteries

• More power, more compact, more control
• Up to 339Nm of maximum torque
• 1/2" anvil with friction ring for quick and easy socket changes
• Brushless POWERSTATE™ motor delivers more power in a more compact size
• REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Individual battery cell monitoring optimises tool run timeand ensures long term pack durability
• Better access in tight spaces with an overall length of only 124.5mm
• 4-Mode DRIVE CONTROL with auto-shut off mode, offers the user precise control
• Bright LEDworkspace illumination
• Flexible battery system: works with all MILWAUKEE‚® M12™ batteries

Basic Information

• Packaging: 20 Kg bags
• Colors: Grey
• Article Number: LA170305002521M

USES

• Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

Material: PP-H

Protects valvespumpsetc. from becoming soiled

Easy dismantling for cleaning the screens

Screen perforation 0.5 mm

For easy installation and removal

Overall "167305199GF167305199

• 10 bar Gas / 16 bar Water
• Branch Saddle installation only with installation set Topload TL225 (799.300.807)
• Angle adaptors (799.350.340) for fusion cable required
• 4 mm pin connectors
• Limited path fusion indicators
• Spigot outlet for butt- and electrofusion
• Full pressure applicable - no derating factor
• With integrated pressure test port for test cap (799.199.287)

• Breaker Points. 3 offset aggressive power breakers. These produce a "Demolition" effect and create micro cracks in the drilled material. Up to 25% FASTER
• Centering tip. Ensures immediate spot drilling with pin point accuracy. Prevents skidding on smooth surfaces
• Enlarged rebar chamfers. Prevents side tip damage when hitting rebar. Reduces the risk of the drill bit jamming when hittingrebar
• Tapered shoulder design. Thinner shoulder towards drill tip for less friction providing for greater speed. Ideal for cordless hammers identified from its tapered shoulder geometry
• Reinforced flute.High volume flute geometry for optimum dust removal. Reinforced flute design (thicker core) gives: - Full power transfer to the tip. - Lower vibrations. - Exceptional break resistance, less breakages and best durability
• Made in Germany
• FASTEST: New aggressive tip geometry with 3 chip breakers demolishes the concrete quicker and a tapered shoulder design minimises friction enabling the M2 drill bit to deliver faster drilling speed
• DURABILITY: Rebar chamfers on the tip prevent side tip damage when hitting metal reinforcement and a thicker core body ensures higher power transfer, lower vibrations and less flute breakages

• for wall hung WC
• connecting pipeƒ 45 mm
• waste sleeveƒ 90 mm
• 150 mm long
• cover for WC fixing bolts