Products
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
- For ELGEF Plus ball valve d20-d110mm
- Extension spindle acc. to DVGW GW336
- Steel square connection 20x20mm for d20-75
- Steel square connection 25x25mm for d90-d110
- Continuously adjustable and self-supporting
- Pullout- and dirt-safe
- Rod hot-dip galvanized
- PE-casing and PE-centering cap with gasket
- Inclusive clip-pin out of stainless stell
- For ELGEF Plus ball valve d20-d110mm
- Extension spindle acc. to DVGW GW336
- Steel square connection 20x20mm for d20-75
- Steel square connection 25x25mm for d90-d110
- Continuously adjustable and self-supporting
- Pullout- and dirt-safe
- Rod hot-dip galvanized
- PE-casing and PE-centering cap with gasket
- Inclusive clip-pin out of stainless stell
- high spout
- GROHE StarLight chrome finish
- GROHE SilkMove 35 mm ceramic cartridge
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- adjustable flow rate limiter
- swivel tubular spout
- selectable swivel area: 0‚° / 150‚°
- flexible connection hoses
- GROHE FastFixation installation system
- high spout
- GROHE StarLight chrome finish
- GROHE SilkMove 35 mm ceramic cartridge
- GROHE Zero isolated inner water ways - lead and nickel free within the faucet
- adjustable flow rate limiter
- swivel tubular spout
- selectable swivel area: 0‚° / 150‚°
- flexible connection hoses
- GROHE FastFixation installation system
- Hardness approx. 65° Shore
- Dimension size "inch" correspond with the thread dimension "G" of the tank adaptor
- Hardness approx. 65° Shore
- Dimension size "inch" correspond with the thread dimension "G" of the tank adaptor
- Drain Test Kit
- Drain Test Kit
- Drain Test Kit
- Drain Test Kit
Material: PP-H
Double flow rate compared to predecessor
One housing nut replaces four screws
Rotating air connection at 90° intervals
Joining faces flat/serrated
Overall length"EN 558
Connecting dimension: ISO 7005 PN 10EN 1092 PN 10
Material: PP-H
Double flow rate compared to predecessor
One housing nut replaces four screws
Rotating air connection at 90° intervals
Joining faces flat/serrated
Overall length"EN 558
Connecting dimension: ISO 7005 PN 10EN 1092 PN 10
- CPVC REDUCER BUSH SPXFT 2X11/2"
- CPVC REDUCER BUSH SPXFT 2X11/2"
- With solvent cement socket metric and parallel female thread Rp
- Reinforcing ring stainless (A2)
- Connection to plastic or metal threads
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
- With solvent cement socket metric and parallel female thread Rp
- Reinforcing ring stainless (A2)
- Connection to plastic or metal threads
- Install with low mechanical stress and avoid large cyclic temperature changes
- Do not use thread sealing pastes that are harmful to PVC-C
- Overall length according to EN 558, ISO 5752
- Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
- Overall length according to EN 558, ISO 5752
- Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
