• POWERSTATE™ brushless motor delivers the power of AC trim routers, max. 31,000 rpm for powerful, smooth cutting
• Variable speed dial allows users to adjust the speed between 10,000 and 31,000 rpm to choose the best control for the application at hand
• All day run time on a single charge of an M18™ 5.0 Ah battery (up to 115m)
• Innovative height adjustment system incorporating a 0.4 mm micro adjustment
• Active brake stops the router bit quickly
• Included plunge base features 3 stop pins for multiple pass mortising
• Dual LED lights to illuminate the work surface
• Compatible with the dust collection shroud (DEK 26)
• Supplied with 2 x dust extraction attachments, 146 mm sub-baseplate which accepts 31.75 mm guide bushings, 6 mm and 6.35mm collets, plunge base, 2 x side fences
• Integrates three MILWAUKEE‚®-exclusive technologies - the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite
• Flexible battery system: works with all MILWAUKEE‚® M18™ batteries

• Material: PP-H
• Micro-doser
• Excellent control characteristics
• Designed for easy installation and removal
• Ball seat PTFE
• Angle of operation 180°with scale
• Integrated stainless steel mounting inserts
• Z-length, end connectors and union nuts not compatible to Type 323

• Material: PP-H
• Lockable lever as standard (DN10-DN50)
• For easy installation and removal (valve end and union nut are compatible with type 546)
• Ball seat PTFE
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
• Z-dimension, valve end and union nut are compatible with type 543 (1stGeneration)

Material: PP-H

Double flow rate compared to predecessor

One housing nut replaces four screws

Rotating air connection at 90° intervals

Joining faces flat/serrated

Overall length"EN 558

Connecting dimension: ISO 7005 PN 10EN 1092 PN 10167627114GF167627114

• For ELGEF Plus ball valve d20-d110mm
• Extension spindle acc. to DVGW GW336
• Steel square connection 20x20mm for d20-75
• Steel square connection 25x25mm for d90-d110
• Continuously adjustable and self-supporting
• Pullout- and dirt-safe
• Rod hot-dip galvanized
• PE-casing and PE-centering cap with gasket
• Inclusive clip-pin out of stainless stell

• 10 bar Gas / 16 bar Water
• d160 up to d225 are supplied with base plate and straps
• d1 = diameter of bore
• Regarding pressure rate and application local standardsand regulations have to be considered

• 10 bar Gas / 16 bar Water
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators

• 10 bar Gas / 16 bar Water
• With integrated cutter to tap live mains under pressure
• Complete with lower part
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet
• O-ring-sealed screw cap
• Supplied as Kit with enclosed service line fitting (ELGEF Plus Coupler or Reducer)
• d355-400mm. Not suitable for pipes if wall thickness islarger than SDR17 pipes.

• 10 bar Gas / 16 bar Water
• Branch Saddle complete, incl. lower part and 3 screws
• Additional fixing with snatch hinge
• Electrofusion outlet with integrated pipe fixation
• Protected wire without medium contact
• 4 mm pin connectors
• Limited path fusion indicators
• FM 1613 approved - 15 bar

• 10 bar Gas / 16 bar Water
• Branch Saddle installation only with installation set Topload TL225 (799.300.807)
• Angle adaptors (799.350.340) for fusion cable required
• 4 mm pin connectors
• Limited path fusion indicators
• Spigot outlet for butt- and electrofusion
• Full pressure applicable - no derating factor
• With integrated pressure test port for test cap (799.199.287)

• 10 bar Gas / 16 bar Water
• With integrated drill bit to tap live mains under pressure
• Complete with lower part and premounted PE100 coated valve piece
• The valveis closed clockwise
• Number of turns to fully open or close valve is 13 for outlet d32
• Number of turns to fully open or close valve is 28 for outlet d63
• Spindle size (SW) 14
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet

• 10 bar Gas / 16 bar Water
• With integrated drill bit to tap live mains under pressure
• Complete with lower part and premounted PE100 coated valve piece
• The valveis closed clockwise
• Number of turns to fully open or close valve is 13 for outlet d32
• Number of turns to fully open or close valve is 28 for outlet d63
• Spindle size (SW) 14
• 4 mm pin connectors
• Limited path fusion indicators
• Long fusion outlet