Products
GEORG FISCHER
90 x 50 MM
GEORG FISCHER 90 x 50 MM
- Pressure rating: 16 bar water / 10 bar gas
In Stock
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
From [90 MM] to [200 MM]
GEORG FISCHER From [90 MM] to [200 MM]
- 5 bar Gas / 10 bar Water
In Stock
- 5 bar Gas / 10 bar Water
GEORG FISCHER
From [50 MM] to [280 MM]
GEORG FISCHER From [50 MM] to [280 MM]
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
In Stock
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
GEORG FISCHER
From [110 MM] to [200 MM]
GEORG FISCHER From [110 MM] to [200 MM]
- 5 bar Gas / 10 bar Water
In Stock
- 5 bar Gas / 10 bar Water
GEORG FISCHER
From [20 MM] to [280 MM]
GEORG FISCHER From [20 MM] to [280 MM]
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
In Stock
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
GEORG FISCHER
From [90 MM] to [200 MM]
GEORG FISCHER From [90 MM] to [200 MM]
- 5 bar Gas / 10 bar Water
In Stock
- 5 bar Gas / 10 bar Water
GEORG FISCHER
From [25 MM] to [250 MM]
GEORG FISCHER From [25 MM] to [250 MM]
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
In Stock
- 10 bar Gas / 16 bar Water
- FM 1613 approved - 15 bar
GEORG FISCHER
25 x 20 MM
GEORG FISCHER 25 x 20 MM
- Pressure rating: 16 bar water / 10 bar gas
In Stock
- Pressure rating: 16 bar water / 10 bar gas
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
- Suitable for all kinds of pipe material. For use on plastic pipes please consult Georg Fischer Waga N.V.
- Single band clamp with full circle gasket
- All metal parts arestainless steel, quality AISI 304 (on request AISI 316)
- The rubber gasket is available in NBR (EPDM on request)
- Water and gas: NBR according to EN 682 (-10°C up to +70°C); potable water: EPDM according toEN 681-1 (-10°C up to +55°C)
- For working pressures in GAS please consult Georg Fischer Waga N.V.
- To choose the correct length of Multi/Clamp check our technical information
GEORG FISCHER
STANDARD
GEORG FISCHER STANDARD
- 10 bar Gas / 16 bar Water
- Branch Saddle installation only with installation set Topload TL225 (799.300.807)
- Angle adaptors (799.350.340) for fusion cable required
- 4 mm pin connectors
- Limited path fusion indicators
- Spigot outlet for butt- and electrofusion
- Full pressure applicable - no derating factor
- With integrated pressure test port for test cap (799.199.287)
- 10 bar Gas / 16 bar Water
- Branch Saddle installation only with installation set Topload TL225 (799.300.807)
- Angle adaptors (799.350.340) for fusion cable required
- 4 mm pin connectors
- Limited path fusion indicators
- Spigot outlet for butt- and electrofusion
- Full pressure applicable - no derating factor
- With integrated pressure test port for test cap (799.199.287)
GEORG FISCHER
From [35 MM] to [110 MM]
GEORG FISCHER From [35 MM] to [110 MM]
- For all metric GF Flange Adaptors
- Hardness approx. 65° Shore
- Integrated fixation aids from d110
- Centering on the inner diameter of the screw crown "
- di FA are the suitable inner diameters of flanges adaptors
- For all metric GF Flange Adaptors
- Hardness approx. 65° Shore
- Integrated fixation aids from d110
- Centering on the inner diameter of the screw crown "
- di FA are the suitable inner diameters of flanges adaptors
GEORG FISCHER
200 MM
GEORG FISCHER 200 MM
"
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
"
NBR = Nitrile rubberhardness approx. 80° Shore
For all metric GF Flange Adaptors
Rubber-steel body combined with rubber profile cord ring up to d630
Rubber-steel body ideal for big "dimensions (d710 - d1000)
Approved acc. to DVGW standard DIN EN 682 for gas
D corresponds to the centring at the inner diameter of the screw crown
