Products
LATICRETE
20 KG
LATICRETE 20 KG
Basic Information
- Packaging: 20 Kg bags
- Colors: Grey
- Article Number: LA170305002521M
USES
- Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation
TECHNICAL DATA
Working Properties (At 25ºC)
- Wet density: 1.80 gm/cm³
- Open time: 30 minutes
- Pot life: 2 Hrs.
- Time to traffic: 48 Hrs
Product Description
- Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
- Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.
In Stock
Basic Information
- Packaging: 20 Kg bags
- Colors: Grey
- Article Number: LA170305002521M
USES
- Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation
TECHNICAL DATA
Working Properties (At 25ºC)
- Wet density: 1.80 gm/cm³
- Open time: 30 minutes
- Pot life: 2 Hrs.
- Time to traffic: 48 Hrs
Product Description
- Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
- Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.
