Products
Grohe
1/2 IN
Grohe 1/2 IN
- 3 outlets 1/2"
- 2 inlets below, 1/2"
- installation depth 75-105 mm
- connection unit in DR brass
- pre-mounted flushing plug
- stable build-in box andprotective cover
- fixing options for solid walls and dry cladding
- gasket
- without set for final installation
In Stock
- 3 outlets 1/2"
- 2 inlets below, 1/2"
- installation depth 75-105 mm
- connection unit in DR brass
- pre-mounted flushing plug
- stable build-in box andprotective cover
- fixing options for solid walls and dry cladding
- gasket
- without set for final installation
Grohe
STANDARD
Grohe STANDARD
- retrofit unit for close-coupled flushing cisterns
- connection from below
- with filling valve, servo discharge valve
- interruptible flush cycle
- fixing setwith 100 mm screws and cellular rubber joint 100 mm dia.
- centring for filling and discharge valve when having larger bore holes
- GROHE StarLight chrome finish
- **) max. shortening 100 mm
In Stock
- retrofit unit for close-coupled flushing cisterns
- connection from below
- with filling valve, servo discharge valve
- interruptible flush cycle
- fixing setwith 100 mm screws and cellular rubber joint 100 mm dia.
- centring for filling and discharge valve when having larger bore holes
- GROHE StarLight chrome finish
- **) max. shortening 100 mm
GEORG FISCHER
From [1-1/4 MM TO INCH] to [63 x 2 MM TO INCH]
GEORG FISCHER From [1-1/4 MM TO INCH] to [63 x 2 MM TO INCH]
- PE 100 SDR 11 (ISO S5)
- 10 bar Gas / 16 bar Water
- With integral pipe fixation
- 4 mm pin connectors
- Limited path fusion indicators
- Supplied as a kit
In Stock
- PE 100 SDR 11 (ISO S5)
- 10 bar Gas / 16 bar Water
- With integral pipe fixation
- 4 mm pin connectors
- Limited path fusion indicators
- Supplied as a kit
BAILEY
From [2 IN] to [4 IN]
BAILEY From [2 IN] to [4 IN]
- Builds up pressure of water which forces obstruction clear.
In Stock
- Builds up pressure of water which forces obstruction clear.
LATICRETE
20 KG
LATICRETE 20 KG
Basic Information
- Packaging: 20 Kg bags
- Colors: Grey
- Article Number: LA170305002521M
USES
- Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation
TECHNICAL DATA
Working Properties (At 25ºC)
- Wet density: 1.80 gm/cm³
- Open time: 30 minutes
- Pot life: 2 Hrs.
- Time to traffic: 48 Hrs
Product Description
- Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
- Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.
In Stock
Basic Information
- Packaging: 20 Kg bags
- Colors: Grey
- Article Number: LA170305002521M
USES
- Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation
TECHNICAL DATA
Working Properties (At 25ºC)
- Wet density: 1.80 gm/cm³
- Open time: 30 minutes
- Pot life: 2 Hrs.
- Time to traffic: 48 Hrs
Product Description
- Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
- Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.
Grohe
STANDARD
Grohe STANDARD
- without finishing trim set
- GROHE SilkMove 46 mm ceramic cartridge
- adjustable flow rate limiter
- body of DR brass
In Stock
- without finishing trim set
- GROHE SilkMove 46 mm ceramic cartridge
- adjustable flow rate limiter
- body of DR brass
GEORG FISCHER
From [110 MM] to [250 MM]
GEORG FISCHER From [110 MM] to [250 MM]
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
In Stock
- For IR, butt and electrofusion welding according to DVS 2207
- Type A: without chamfer
- Type B: with chamfer
- Suitable for plastic butterfly valves type 567/578/565 up to DN250. ecoFit adapter SDR11 required for DN350 and above
- Suitable for metal butterfly valves type 038/039/044/065 up to DN250. ecoFit adapter SDR11 is required for DN350 and above
- Profile seal: d20-d800 NBR, EPDM, FKM
- Flat gasket: d20-d315 EPDM, FKM
- Pressure rating: 16 bar water / 10 bar gas
- Please refer to the Online Tool: Perfect Flange Connection - GF Piping Systems (gfps.com)
- FM 1613 approved - PN 15
GEORG FISCHER
From [90 MM] to [75 MM]
GEORG FISCHER From [90 MM] to [75 MM]
- C-PVC 90° EQUAL TEE 90 MM
In Stock
- C-PVC 90° EQUAL TEE 90 MM
GEORG FISCHER
From [90 MM] to [75 MM]
GEORG FISCHER From [90 MM] to [75 MM]
- Material: PP (30% glass-fibre reinforced) with steel ring
- Metric: ISO 7005, EN 1092, ISO 9624
- ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
- Special flange adapter ANSI for d25 - d50 and d90 required
In Stock
- Material: PP (30% glass-fibre reinforced) with steel ring
- Metric: ISO 7005, EN 1092, ISO 9624
- ASME: ANSI/ASME B 16.5 class 150, ASTM D2024, BS 1560, BS EN 1759
- Special flange adapter ANSI for d25 - d50 and d90 required
GEORG FISCHER
200 MM
GEORG FISCHER 200 MM
- 5 bar Gas / 10 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
- d160 with removable centre stop
In Stock
- 5 bar Gas / 10 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
- d160 with removable centre stop
GEORG FISCHER
32 x 20 MM
GEORG FISCHER 32 x 20 MM
- 10 bar Gas / 16 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
In Stock
- 10 bar Gas / 16 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
GEORG FISCHER
From [20 MM] to [63 MM]
GEORG FISCHER From [20 MM] to [63 MM]
- 10 bar Gas / 16 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
- With integral pipe fixation
In Stock
- 10 bar Gas / 16 bar Water
- 4 mm pin connectors
- Limited path fusion indicators
- With integral pipe fixation
Filter
Shopping Options