Authorized Distributor of Milwaukee, TCC, Arrow, Parabon in Dubai and other U.A.E Region.

• Especially engineered blades for exclusive use on 12 V HACKZALL™.
• Bi-Metal construction for increased tooth durability.
• Optimised tooth form for aggressive and fastercutting.
• Thinner blade body for better speed of cut and up to 35% more cuts per charge vs. standard Bi Metal blades.
• 75 mm scraper: for removing strong adhesive silicon, caulk, paint and rust.
• 125mm wide scraper: for removing glue, silicon, caulk, vinyl, rust, paint and wallpaper.
• Grout removal blade: for removing damaged or moulded grout between tiles.

• Cutting edge technology for maximum productivity.
• Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
• Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
• Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
• Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
• Diagonal slots aid the removaland ejection of the core.
• Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152MIL49224152

• Breaker Points. 3 offset aggressive power breakers. These produce a "Demolition" effect and create micro cracks in the drilled material. Up to 25% FASTER
• Centering tip. Ensures immediate spot drilling with pin point accuracy. Prevents skidding on smooth surfaces
• Enlarged rebar chamfers. Prevents side tip damage when hitting rebar. Reduces the risk of the drill bit jamming when hittingrebar
• Tapered shoulder design. Thinner shoulder towards drill tip for less friction providing for greater speed. Ideal for cordless hammers identified from its tapered shoulder geometry
• Reinforced flute.High volume flute geometry for optimum dust removal. Reinforced flute design (thicker core) gives: - Full power transfer to the tip. - Lower vibrations. - Exceptional break resistance, less breakages and best durability
• Made in Germany
• FASTEST: New aggressive tip geometry with 3 chip breakers demolishes the concrete quicker and a tapered shoulder design minimises friction enabling the M2 drill bit to deliver faster drilling speed
• DURABILITY: Rebar chamfers on the tip prevent side tip damage when hitting metal reinforcement and a thicker core body ensures higher power transfer, lower vibrations and less flute breakages

• Ideal for a wide range of breaking and demolition work of concrete or breeze block.

• Ideal for a wide range of breaking and cutting of concrete as well as demolition work.

• Suitable for applications in wood and metal.

• Thunderweb design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length.Even at the narrowest point the Thunderweb core is thicker than that of a standard drill bit.
• Parabolic web cross section: Large web thickness. Strength built in.
• Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better increasing life time.'
• 135‚° Split point - Precision starting, drill bit won't walk on material surface.Polished finish reduces friction and extends drill bit life.
• Impact resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque equalling less breakages.

• Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• Suitable for drilling high alloy content steelsand metals with tensile strengths over 1000 N/mm‚² like stainless steel.
• QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling startwithout walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Colour: bronze.

SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

Best fitting thanks to 6 gripping points.

Recessed corners allow torque to be transferred across the flats of the socket rather than producing stress on the points or corners.

Thin wall construction provides access to tight spaces.'

Laser etched size markings for easy identification andwon't wear off.

• SDS PLUS 3PC CHISEL SET

• Colour coded for easy identification.
• Made from high quality alloy steel for strength and durability.
• Set includes 1/2"³ impact sockets of 17 mm, 19 mm and 21 mm length.

• NF C 20-130 for copper compression cable lugs