Authorized Distributor of Milwaukee, TCC, Arrow, Parabon in Dubai and other U.A.E Region.
Featured Products
- Lockable lever as standard (DN10-DN50)
- For easy installation and removal (valve end and union nut are compatible with type 546)
- Ball seat PTFE
- Pneumatic or electric actuator available separately
- Angle of operation 360° without turn limiter
- Turn limiter 90° enclosed, in different positions usable as a clip-on ring
- Integrated stainless steel mounting inserts
GEORG FISCHER
32 MM
- Double flow rate compared to predecessor
- One housing nut replaces four screws
- Handwheel with built-in locking mechanism
- Flat sealing faces
- Overall length EN 558
- Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10, BS 4504 PN 10
- Option:
- Individual configuration of the valve
- Self adjusting multifunctional module withintegrated limit switches
GEORG FISCHER
DN 50
- Built on with pneumatic actuator PA11 (DN10/15-25), PA21 (DN32-50)
- Control time 90°<) 1-2s
- For easy installation and removal
- Integrated stainless steel mounting inserts
![MILWAUKEE M12 FUE SUB COMPACT PERCUSSION DRILL [BARE-TOOL]|[M12FPD-0] (Includes 2yr platinum warranty)](https://catalyst-dev2.wylog.com/media/catalog/product/cache/503f2f5e25f27962b01fad949171e229/p/a/parentMLW4933459801_1_.jpg?t=20260205)
MILWAUKEE
STANDARD
In Stock
Product Details:
- Brushless POWERSTATE™ motor delivers more power in a more compact size
- Individual battery cell monitoring optimizes tool run time and ensures long-term pack durability
- 13 mm metal chuck for quick bit changes and bit retention
- Electronic clutch with 16 torque settings, plus 1 for locked clutch drilling and 1 for locked clutch hammer
- Fuel gauge displays remaining charge
- Bright LED workspace illumination
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
Basic Information:
- Chuck Capacity (mm): 13
- Max. Drilling Masonry (mm): 13
- Max. Drilling Steel (mm): 13
- Max. Drilling Wood (mm): 35
- Max. Percussion Rate (BPM): 0 - 25,500
- Max. Torque (Nm): 44
- No Load Speed Gear 1 (RPM): 0 - 450
- No Load Speed Gear 2 (RPM): 0 - 1700
- Speed Settings: 2
- Supplied In: No kitbox or bag supplied
- Wood Screws To (mm): 8
- Article Number: 4933459801
Power Source:
- Battery Pack Capacity (Ah): No batteries supplied
- Battery Type: Li-ion
- Charger Included: No charger supplied
- Charger Supplied: No charger supplied
- No. of Batteries Supplied: 0
- Voltage (V): 12
Weight:
- Weight with Battery Pack (EPTA) (kg): 1.2 (M12 B2)
![UPVC COLORO VALVE D/UNION S/SKT 1 1/2'' [NEW CODE - GF161541206]](https://catalyst-dev2.wylog.com/media/catalog/product/cache/503f2f5e25f27962b01fad949171e229/p/a/parentGF161355202_3.jpg?t=20260205)
GEORG FISCHER
1/2 IN
- UPVC COLORO VALVE D/UNION S/SKT 1 1/2"
Products
MILWAUKEE
230 MM
MILWAUKEE 230 MM
- Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
- Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
- Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
- FANG TIP™: For faster plunge cutting and reaching into restricted areas.
- NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
- Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
- Thick1.27 mm robust blade body for precise straight cuts.
- 25 mm blade height for improved stability and minimum vibration.
- Best for wood / nails / hardened fastners demolition
- Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applications. Cuts through harderned screws and fastners.
- Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials (wood/nails/bolts/screws/cast iron/asphalt roofing felt shingles).
- Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws.
- FANG TIP™: For faster plunge cutting and reaching into restricted areas.
- NAIL GUARD™: Protects the tooth during nail impacts for increased durability and lifetime.
- Sloped shape: Excellent for plunge cutting and reaching into restricted areas.
- Thick1.27 mm robust blade body for precise straight cuts.
- 25 mm blade height for improved stability and minimum vibration.
- Best for wood / nails / hardened fastners demolition
MILWAUKEE
150 MM
MILWAUKEE 150 MM
- Strong: Robust 1.06 mm thick body.
- Shatter resistant: The bi-metal blade body will bend and flex but not break.
- Torch: - Thick 1.06 mm robust blade body for precise cuts in sheet metal and pipes.
- 25 mm blade height for improved stability and minimum vibration.
- Strong: Robust 1.06 mm thick body.
- Shatter resistant: The bi-metal blade body will bend and flex but not break.
- Torch: - Thick 1.06 mm robust blade body for precise cuts in sheet metal and pipes.
- 25 mm blade height for improved stability and minimum vibration.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Especially engineered blades for exclusive use on 12 V HACKZALL™.
- Bi-Metal construction for increased tooth durability.
- Optimised tooth form for aggressive and fastercutting.
- Thinner blade body for better speed of cut and up to 35% more cuts per charge vs. standard Bi Metal blades.
- 75 mm scraper: for removing strong adhesive silicon, caulk, paint and rust.
- 125mm wide scraper: for removing glue, silicon, caulk, vinyl, rust, paint and wallpaper.
- Grout removal blade: for removing damaged or moulded grout between tiles.
- Especially engineered blades for exclusive use on 12 V HACKZALL™.
- Bi-Metal construction for increased tooth durability.
- Optimised tooth form for aggressive and fastercutting.
- Thinner blade body for better speed of cut and up to 35% more cuts per charge vs. standard Bi Metal blades.
- 75 mm scraper: for removing strong adhesive silicon, caulk, paint and rust.
- 125mm wide scraper: for removing glue, silicon, caulk, vinyl, rust, paint and wallpaper.
- Grout removal blade: for removing damaged or moulded grout between tiles.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152MIL49224152
- Cutting edge technology for maximum productivity.
- Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
- Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser weldedonto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesawsare ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
- Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain itsshape but also has built in elasticity. - Effective sawing depth is 41 mm.
- Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strengthand rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
- Diagonal slots aid the removaland ejection of the core.
- Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152MIL49224152
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Suitable for applications in wood and metal.
- Suitable for applications in wood and metal.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- NF C 20-130 for copper compression cable lugs
- NF C 20-130 for copper compression cable lugs
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- A trade quality turbo blade with extra thin body for very fast, precise and chip free cuts in thin materials such as granite, marble slabs and tiles (type: porcelain, gres, ceramic).
- Due to the high quality of this blade it is also suitable for cutting most building materials.
- A trade quality turbo blade with extra thin body for very fast, precise and chip free cuts in thin materials such as granite, marble slabs and tiles (type: porcelain, gres, ceramic).
- Due to the high quality of this blade it is also suitable for cutting most building materials.
MILWAUKEE
STANDARD
MILWAUKEE STANDARD
- Replacement saw chain to fit M18 FCHS chainsaw.
- Replacement saw chain to fit M18 FCHS chainsaw.
Filter
Filter by
Shopping Options - TOOL ACCESSORIES Remove This Item
- CUTTING & SAWING Remove This Item